555057
4
Verklein
Vergroot
Pagina terug
1/4
Pagina verder
The JA-80X communicator 4 / 4 MKR51103
5. Communicator RESET
sequence 78080
To reset the communicator to its factory default settings enter:
78080
Note: Performing a RESET does not affect the voice message
recordings.
6. Specification
Dialling method DTMF
Phone line check enable / disable
Voice message phone numbers up to 4
(voice message assigned to one of the 5 alarm types)
Digital data transmission to an ARC CID
(Alarm Receiving Centre) (Contact ID)
Complies with EN 50131-1:
Security grade 2
Alarm transmission system class ATS 4
Environmental class 2 Indoor general (-10°C to + 40°C)
Further standards: EN 50136-1-1, EN 50136-2-1, ANSI C63.4,
EN 55022, EN 50130-4, EN 60950-1
Analogue interface connectivity EN 301437, TBR 21
Jablotron Ltd. hereby declares that the JA-80X is in
compliance with the essential requirements and other
relevant provisions of Directive 1999/5/.
The original of the conformity assessment can be found
on the web site www.jablotron.com
, Technical Support
section.
Note: Dispose of batteries safely depending on battery
type and local regulations. Although this product does
not contain any harmful materials we suggest you return
the product to the dealer or directly to the manufacturer
after use.
A brief list of programming sequences
Function Sequence Options / Notes Factory default
Programming telephone
numbers for voice
reporting
71 M xx…x *0 M = memory 1to 4
xx…x = tel. number (max. 16 digits)
*0 is the entry terminator
71M*0 erases memory M
M1 to M4 erased
Voice message recording 72
To be entered on the system keypad during the ringing period. (English)
Filtering reported events 73nx N = Group of event types
1 = All events
2 = Alarm triggering events
3 = Alarm cancellations
4 = Setting/Unsetting (Arming/Disarming)
5 = Faults
6 = Maintenance events only
7 = Regular (periodical) reports
x = 1 Report x = 0 No report
7311
ARC communication test 74
ARC phone numbers
75Mxx…x*0 M = 1 main ARC
M = 2 backup ARC
Both M1 and M2 erased
Installation ID for ARC
use
76xx…x*0
0000
Ringing period for remote
access
77n n = 1-8 duration in multiples of 5 seconds
n = 9 the call is answered after ringing for the second time
n = 0 the call is never answered
n = 0
Communicator RESET 78080
ARC reporting mode 791x x = 0 no reports
x = 1 backup to ARC1
x = 2 backup to ARC2
x = 3 always report
7910
Limited event-reporting 792x x = 0 limited reports for the 2
nd
tel. number
x = 1 all events reported to all numbers
7921
Telephone line
monitoring
793x x = 0 monitoring disabled
x = 1 monitoring enabled
7930
Sensitivity to signals on
the telephone line
794x x = 0 basic sensitivity
x = 1 higher sensitivity
7940
Busy – tone detection 795x x = 0 busy-tone detection disabled
x = 1 busy-tone detection enabled
7950
4

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Jablotron JA-80X bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Jablotron JA-80X in de taal/talen: Engels als bijlage per email.

De handleiding is 0,08 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Jablotron JA-80X

Jablotron JA-80X Gebruiksaanwijzing - Nederlands - 5 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info