554882
4
Verklein
Vergroot
Pagina terug
1/15
Pagina verder
GD-04 DAVID 4 MKS51202_OS1*
All parameters are sufficiently described on the page so that you do not need to use David’s
installation or user manual to perform programming.
Programming via the web site is free of charge. No user registration is required. Your David’s
settings are not stored on the web server. Instead, you can save them as a file in your computer
for future use (the file can then be imported to the page). The page does not allow you to
retrieve the current settings of your David. Any programming is only possible if a valid access
code is specified (the code, being a part of David’s settings, is not stored on the web server, only
in your David). This makes the web access to your David both secure and simple.
6.2. Using a PC running GDLink software
If you need to program David frequently, connecting David to a PC running specialized
software is the recommended option. GDLink software allows you not only to send programming
instructions but also to retrieve the current David settings. For the PC connection, you can use a
GD-04P link cable connected to a USB port (the cable is supplied separately). GDLink software
is available either in the GD-04P’s package or on the www.jablotron.cz
web site.
David’s communication protocol is available for use by other computer programs which can
thus utilize GD-04 transfers (including programming instructions or GSM status information).
6.3. SMS instructions
David can also be configured via SMS instructions from your mobile phone. The programming
instruction format is explained in the following example:
PC, ARX, heating on, DRX, heating off
where:
PC is the access (programming) code, required at the start of any programming
SMS message* (2 to 8 ASCII characters, the factory default setting is PC)
, is a comma separator
ARX is the name of the instruction for programming the text you wish to use for
switching relay X on via SMS. The desired text (“heating on”) follows, separated
by a comma.
DRX is similar to ARX, related to switching relay X off.
The above SMS instruction tells David that the X relay can be switched on/off by the SMS
instructions “heating on” / ”heating off”.
Note:
This text distinguishes between SMS messages and SMS instructions – an SMS message
can contain multiple SMS instructions in a sequence.
SMS instruction rules:
1. Any programming SMS message must start with a valid access code (the factory default
code is PC). Multiple messages mean multiple codes.
2. A single message can contain multiple instructions. David is capable of long message
processing – if enabled by your phone, you can write and send a programming SMS
message containing up to 2400 ASCII characters.
3. The comma separator is used both between individual instructions and between individual
segments within instructions.
4. Spaces are ignored, except in operational texts which are meant to be a part of a David
setting.
5. The successful processing of a programming SMS is confirmed from David by the SMS
reply “PROGRAM OK”.
6. When an error is encountered, David reports a “PROGRAM ERROR” followed by the text of
the instruction which has not been recognized. Preceding instructions within the message
are carried out, succeeding instructions are ignored.
4

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Jablotron GD-04 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Jablotron GD-04 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,26 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info