554882
2
Verklein
Vergroot
Pagina terug
1/15
Pagina verder
GD-04 DAVID 2 MKS51202_OS1*
1.2. David can be used as:
A switch with SMS remote control. SMS texts for switching particular terminals on/off are
configurable.
A time-switch which can be activated remotely via a mobile phone (the switch-on period is
configurable from 1 second to 10 hours).
A relay with dialling-in remote control. Up to 50 tel. numbers can be authorized for each
relay. Because calls are not answered dialling-in control within GSM is free of charge. (David
only checks the caller’s number and – if the number is authorized – responds with relay
activation.) This can be used for parking latch control etc.
A relay with validity-limited dialling-in remote control. Each authorized number can have
a limit to the number of calls. When the call count reaches the limit the tel. number is de-
authorized. This can be useful for pre-paid services such as e.g. parking. Any tel. number can
be re-authorized via SMS by the administrator.
An SMS reporter. Input A to D activations or deactivations can be reported by SMS and
optionally confirmed by phone calls. Each input can have its own message texts and up to 8
tel. numbers programmed.
Examples of David applications can be found on http://www.jablotron.cz/david/en/examples.htm
1.3. David can be supplemented with:
A GD-04A back-up module, which provides David with the ability to work approx. 12 to 24
hours continually without an external power supply, see 11.1.
A GD-04D DTMF module, which allows you to control David’s output relays by entering
numeric codes (DTMF codes) on the telephone keypad during calls, see 11.2.
A GD-04P link cable, which allows you to connect David to a PC through a USB port and
perform any desired configuration using GDLink software.
A GD-04R radio module, which allows input A to D activations via wireless buttons or
detectors of the OASiS series and also provides David with the capability of output relay X or
Y state transmission to UC or AC OASiS receivers. In addition, you can control relays X or Y
“locally” via RC-8x keyfobs (so that an appliance can be controlled both via a mobile phone
and a keyfob). The module also allows heating control (again locally or remotely via a mobile
phone) using wireless thermostats of the TP-8x series.
A detailed description of optional accessories can be found in chapter 11.
2. David’s SIM card
In order to function, David needs a SIM card, preferably a tariffed one.
Test the SIM card by using it in your mobile phone – SMS sending and calling must work
correctly.
Switch off the PIN code protection via the phone menu (or set the PIN code to 1234).
Check the GSM signal strength in David’s location.
3. Installation
1. The GSM antenna should not be shielded by metals. If necessary, an external antenna
designed for the 900/1800MHz GSM band can be connected via a 50 SMA connector.
2. Open the cover and release the electronic circuit board by pressing the tabs.
3. Mount the rear plastic cover at the desired location.
4. Insert a SIM card: Open the SIM card case by shifting the moving part in the direction of
the terminals and tipping it off. Make sure that the card is correctly oriented and insert it.
Close the SIM card case (fold and re-shift the moving part).
2

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Jablotron GD-04 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Jablotron GD-04 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,26 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info