110241
6
Verklein
Vergroot
Pagina terug
1/12
Pagina verder
5
Fig. 14
(1) If you pull the trigger further in, the speed of the blade
accelerates. Begin cutting at a low speed to ensure
the accuracy of your target cut position. Once you’ve
obtained a sufficient cutting depth, increase the
cutting speed.
(2) On the dial scale, “5” is the maximum speed and “1”
the minimum. The high speed is generally suitable
for soft materials such as wood, and the low speed is
suitable for hard materials such as metal. We
recommend that you use the following as a rough
guide in selecting the suitable speed for the materials
you are cutting.
CAUTION
When cutting at low speed (scale of 1 – 2), never cut a
wooden board more than 10 mm thick or a mild steel
plate more than 2 mm thick. The load on the motor
can result in overheating and damage.
Although this unit employs a powerful motor,
prolonged use at a low speed will increase the load
unduly and may lead to overheating. Properly adjust
the saw blade to allow steady, smooth cutting
operation, avoiding any unreasonable use such as
sudden stops during cutting operation.
9. Adjusting the swing cutting operation
Two cutting systems can be selected with this unit.
The first is straight cutting, in which the saw blade is
moved linearly, and the second is the swing cutting,
in which the saw blade is swung like a pendulum.
(Fig. 15, Fig. 16)
(1) Straight cutting
You can perform straight cutting by setting the change
lever widthwise. Straight cutting should normally be
performed when cutting hard materials such as metal,
etc. (Fig. 15)
Example of materials Recommended
to be cut dial scale
Mild steel pipes /
cast-iron tubes / 2 – 4
L-shaped angle steel
Wood / wood with nails
driven in
5
Stainless steel 1 – 3
Aluminum / brass / copper 2 – 4
Plaster board 4 – 5
Plastic / fiber board 1 – 3
Graduation
Dial
Switch trigger
Fig. 15
(2) Swing cutting
You can perform swing cutting by setting the change
lever lengthways. Swing cutting should normally be
performed when cutting soft materials such as wood,
etc.
Swing cutting is efficient since the saw blade forcibly
bites into the material. (Fig. 16)
You can cut efficiently by swing cutting, mounting the
saw blade in whichever direction, upward or
downward.
Fig. 16
CAUTION
Even for soft materials, you should perform straight
cutting if you wish to make curved or clean cuts.
Dust and dirt accumulated on the change lever section
can degrade the function of the change lever.
Periodically clean the change lever section.
When performing swing cutting, use a saw with
straight blade. If a saw with curved blade is used, the
saw blade may be broken or the unit may be damaged.
10. RCD
The use of a residual current device with a rated
residual current of 30mA or less at all times is
recommended.
HOW TO USE
CAUTION
Avoid carrying it plugged to the outlet with your finger
on the switch. A sudden startup can result in an
unexpected injury.
Be careful not to let sawdust, earth, moisture, etc.,
enter the inside of the machine through the plunger
section during operation. If sawdust and the like
accumulate in the plunger section, always clean it
before use.
Do not remove the front cover (refer to Fig. 1).
Hold firmly the front cover by hand to operate.
But, do not extend your hand or finger beyond the
flange (see Fig.17) of front cover to avoid an injury.
During use, press the base against the material while
cutting.
Vibration can damage the saw blade if the base is not
pressed firmly against the workpiece.
Furthermore, a tip of the saw blade can sometimes
contact the inner wall of the pipe, damaging the saw
blade.
Straight cutting
Change lever
Swing cutting
Change lever
01Eng_CR13VBY_Eng.p65 7/19/12, 4:34 PM5
6

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Hitachi CR 13 VBY bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Hitachi CR 13 VBY in de taal/talen: Engels als bijlage per email.

De handleiding is 1,05 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Hitachi CR 13 VBY

Hitachi CR 13 VBY Gebruiksaanwijzing - Nederlands, Deutsch, English - 60 pagina's

Hitachi CR 13 VBY Gebruiksaanwijzing - English - 60 pagina's

Hitachi CR 13 VBY Gebruiksaanwijzing - Français, Italiano, Português, Espanõl - 60 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info