480777
4
Verklein
Vergroot
Pagina terug
1/44
Pagina verder
4
Jog dial 5 may be turned either direction.
In case you wish to interrupt programmed oven operation,
you must first reset the settings back to 0.00 and press
button 4, to make the symbol AUTO disappear.
In case of power failure new clock setting is required!
Semi-automatic operation
In this mode you determine the period of oven operation
(period of operation).
Maximum setting is 23 hours and 59 minutes!
Procedure:
Example for easier setting procedure:
Let's set the operation period to 1 hour and 20 minutes (1.20)!
1. Setting the operation period: Press button 2 (display
indicates 0.00 and symbol 7) and turn jog dial 5 until it
shows 1.20 (when you start turning the jog, symbol AUTO
is lit). When this is set and you stop turning the jog, after 5
second lapse the display indicates daily current time and
symbols AUTO and 7 are lit.
2. Turn the oven on: Use oven buttons to set the heating
mode and roasting temperature.
3. Oven starts operating immediately after turning on (start of
roasting/baking); symbols AUTO and #7 are lit during the
operation.
4. After the expiry of preset time – in our case after 1 hour
and 20 minutes -
the oven stops automatically (roasting/baking is over),
sound alarm is heard which may be switched off by
pressing any button 1, 2, 3 or 4, or left to switch on
automatically after 2 minutes,
symbol 7 disappears,
symbol AUTO is flashing.
5. Turn the oven off, press button 4 and the symbol AUTO 3
disappears! When the symbol AUTO disappears the oven
is ready for conventional (manual) operation.
Automatic operation
In this mode you determine the period of oven operation
(period of operation) and the switching off time (end of
operation).
Maximum setting is 23 hours and 59 minutes! Setting of
switching off time is = current time + maximum 23 hours and
59 minutes).
CAUTION!
Oven will not operate in automatic mode unless you turn it on
by means of selected buttons!
Automatic operation procedure
Example for easier setting procedure:
Let's set the operation period to 1 hour and 20 minutes (1.20),
and the end of operation at 13.52!
1. Check whether the clock is set to indicate current time of
day.
2. Setting the operation period: Press button 2 (display
indicates 0.00 and symbol 7) and turn jog dial 5 right, until
it shows 1.20 (when you start turning the jog, symbol
AUTO is lit). When this is set and you stop turning the jog,
after 5 second lapse the display indicates daily current time
and symbols AUTO and 7 are lit.
3. Setting the end of operation Press button 3. Turn the jog
dial 5 to set the desired time (display indicates the nearest
end of operation = current time + preset period of
operation), until 13.52 appears, when the oven is supposed
to stop operating. When you stop turning the jog, after
approximately 5 second lapse the display indicates daily
current time and symbol 8 is lit. Symbol 7 disappears (and
reappears when oven starts operating after certain time).
4. Turn the oven on: Use oven buttons to set the heating
mode and roasting temperature.
5. Oven starts automatic operation at the selected time (in
our case at 12.32 hrs) (start of roasting/baking, arrow 2
disappears), operates for 1 hour and 20 minutes, and stops
operating at 13.52 hours; symbol 7 is lit during the
operation.
6. When the oven stops operating:
intermittent sound alarm is heard which may be switched
off by pressing any button 1, 2, 3 or 4, or left to switch on
automatically after 2 minutes,
symbol 7 disappears,
symbol AUTO is flashing.
7. Turn the oven off, press button 4 and the symbol AUTO
disappears! When the symbol AUTO disappears the
oven is ready for conventional (manual) operation.
Program timer as alarm
Program timer may be used independently (not connected with
oven operation) as a simple alarm, to remind you of certain
preset future time.
Setting procedure
Press button 1 (display indicates 0.00 and symbol 8) and use
jog dial 5 to set the time you wish to be alarmed. Maximum
setting span is 23.59.
When the countdown expires you will hear intermittent sound
signal, which may be switched off by pressing any of the
buttons 1, 2, 3 or 4, or it goes off automatically after 2 minutes.
Dimmed display illumination
Between 22.00 and 5.59 hours the display illumination is
automatically dimmed if the program timer is not in operation
during this period.
Child lock symbol
Child lock activation
Clock must me set to manual operation.
Press simultaneously button 1 and 2 for 8 seconds. Display
indicates »On«.
Turn the rotating button 5 in the direction »+«; display
indicates »OF« and symbol 9 is illuminated. Display then
switches to the current time of day.
Child lock is now active. If you attempt to set the time with
the buttons 2 or 3 the clock will remain idle.
Lock deactivation
Clock must me set to manual operation.
Press simultaneously button 1 and 2 for 8 seconds. Display
indicates »OF«.
Turn the rotating button 5 in the direction »+«; display
indicates »On« and symbol 9 goes off.
WE RESERVE THE RIGHT TO ALTER THE SPECIFICATIONS WITH NO INFLUENCE ON THE
OPERATION OF THE APPLIANCE.
4

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Gorenje-B7570E

Zoeken resetten

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Gorenje B7570E bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Gorenje B7570E in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans als bijlage per email.

De handleiding is 3,7 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Gorenje B7570E

Gorenje B7570E Specificaties - English - 1 pagina's

Gorenje B7570E Gebruiksaanwijzing - English - 16 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info