502505
4
Verklein
Vergroot
Pagina terug
1/29
Pagina verder
4
Follow very carefully the instructions in this manual, save it
and keep it close at hand, ready to carry out any inspection
of parts that may be necessary.
If the machine is used carefully and normal maintenance is
carried out, it will work well for a long time.
The functions and use of the tool you have bought shall be
only those described in this manual. Any other use of the tool
is strictly forbidden.
ILLUSTRATIONS
DESCRIPTION (See gures)
A Lever (Fig.1 & 3)
B Steel plate (Fig.2)
C Adjustment screw (Fig.2)
D Sawdust extraction tube (Fig.2)
E Dust bag (Fig.3)
F Zip fastener (Fig.3)
G Blocking button (Fig.2)
H Trigger switch (Fig.1 & 2)
I Speed control (electronic model only) (Fig.2)
J Brush holder cover (Fig.3)
K Belt direction indicator arrow (Fig.2)
EQUIPMENT
- 1 sawdust and shaving collector bag
- 1 sanding belt (610x100) 80 grit
- Operating instructions
- Safety instructions
- Warranty
BRIEF DESCRIPTION
Any use differing from the above is strictly forbidden. Belt
sanders are devices equipped with powerful motors and an
“endless” abrasive belt, which rotates at great speed over two
rollers. These tools are perfectly adapted for grinding large
amounts of material in a short time: for instance, they are
ideal for rough-grinding wood, for rough sanding, for stripping
painted wood... However, they are not at all suitable for
achieving a ne nish.
BEFORE USING THIS TOOL
Before using the tool, make sure the mains voltage is correct:
it must be the same as that on the specication label.
Machines with 230V can also be connected to a 220-V mains
TECHNICAL DATA
supply.
Before plugging in the tool, always make sure that the trigger
switch works properly and returns to the “OFF” position when
released.
FITTING AND REMOVAL OF THE ABRASIVE BELT
WARNING! Always make sure that the tool is switched off
and unplugged before tting or removing the belt.
Follow the steps below:
1. Pull out lever A completely and t the belt over the rollers.
2. Make sure that the arrow on the back of the belt points in
the same direction as indicator arrow K on the tool.
3. Once the belt is tted over the rollers, push lever A back to
its original position.
4. Adjust the belt tracking: switch on the tool and make sure
the belt is properly aligned.
5. If the edge of the belt sticks out beyond the edge of the
steel plate B or is more than 6 mm from its inside edge, adjust
the belt tracking with the adjuster screw C.
DUST EXTRACTION
WARNING! Always make sure that the tool is switched off
and unplugged before tting or removing the dust bag.
The dust (sawdust) produced while sanding is extracted
into a sawdust collector bag. To t the bag, follow the steps
below:
1. Fit the collector bag (dust bag) E on the sawdust extraction
tube D.
2. Push it rmly onto the sawdust extraction tube D has far
as it will go to avoid the bag E coming off during operation. If
the machine does not extract all the dust, this is probably due
to the quality or moist charac-ter of the material. Blow off the
moist dust particles.
TIP: For best results we recommend emptying the bag E
when approximately half full and shaking it slightly to remove
as much sawdust as possible.
ELECTRONIC SPEED CONTROL
(only mod. FBS100CE)
The electronic speed control I enables the speed of the
sanding belt to be adjusted in different positions num-bered
from 1 al 6. To increase the speed, turn the control I towards
number 6, to decrease the speed, turn towards number 1.
Select the appropriate speed for the nish required and the
part you wish to sand.
Belt sander BSF76/900 BSF100/1200E
Rated power W 900 1200
Sanding belt speed m/min 250 200-400
Sanding belt measurements Mm 76 x 533 100 x 610
Acoustic pressure dB(A) 91,0 96,7
Sound-power level dB(A) 102,0 106,7
Vibration acceleration m/s² 3,7 5,5
Approximate weight (without accessories) according
EPTAProcedure 01/2003
Kg. 3,3 5,3
4

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Felisatti BSF100 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Felisatti BSF100 in de taal/talen: Duits, Engels, Frans, Italiaans, Spaans als bijlage per email.

De handleiding is 0,72 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info