502505
3
Verklein
Vergroot
Pagina terug
1/29
Pagina verder
3
MACHINE-SPECIFIC SAFETY WARNINGS
See “Safety Instructions” manual, supplied with this
instruction manual.
WARNING! When sanding materials such as lead paint,
certain types of wood and metal, the dust pro-duced is
harmful/toxic. It is important to determine whether the paint
being sanded contains lead or not before starting work.
Protect yourself from inhaling this dust, in compliance with
current regulations on accident prevention, by wearing a
mask designed for working with lead paint and fumes.
WARNING! Pregnant women and children should not
enter any area where paint is being sanded until it has been
thoroughly cleaned. Pregnant women and children are at
greater risk from lead poisoning.
• For your personal safety, always connect the machine to a
mains supply protected by a differential and thermal cutout
switch, in accordance with regulations on low-voltage wiring
sitemaps.
• Do not perforate the machine casing, as this would destroy
the protective insulation (use adhesive labels).
• Remove the pin from the base of the plug before carrying
out any adjustment, repairs or maintenance.
WARNING! Before each use, inspect the plug and lead.
Should they need replacing, have this done by an ofcial
service centre.
Always keep the lead out of the machine’s working area.
• Only plug the machine in when it is switched off.
• When using the machine, always wear safety goggles,
gloves and non-slip footwear, and it is advisable to wear ear
protection.
• Hold the machine by the insulated grip areas when carrying
out any operation in which the cutting tool may touch hidden
or its own lead. If a live wire makes contact with any of the
machine’s exposed metal parts, it may give the operator an
electric shock.
• Hold the machine rmly in both hands.
• Make sure that the belt is not in contact with the part to be
worked on before switching on.
• Keep hands away from rotating parts.
• Do not put the machine down whilst it is operating.
Use it only when holding it in your hands.
Do not allow the machine to get wet, nor should it be used in
wet environments. Do not allow the surface of the part being
worked on to come into contact with water.
Do not touch the sandpaper during or immediately after
working, as it becomes very hot and can cause serious
burns.
Never attempt to clean off dust or shavings resulting from
sanding when the machine is operating.
3

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Felisatti BSF100 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Felisatti BSF100 in de taal/talen: Duits, Engels, Frans, Italiaans, Spaans als bijlage per email.

De handleiding is 0,72 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info