19
CHANGING/CLEANING THE AIR FILTERS
To change or clean the two black air filters, follow the procedures below:
1.Open the indoor unit’s
cover and remove both
black air filters by bending
them slightly backward
and the lifting out.
2. Remove the two small filters (Deodorizing and
Electrostatic) from the indoor unit.
After removing the connection
terminal of electric dust collector,
remove the electric dust collector.
(Only DSB-123PH)
3. Examine the filters and determine if they need to be
cleaned or replaced. To clean filters, use a vacuum and
clean off dust. Use water and mild soap also if necessary.
5.Insert cleaned or new black filters back into the unit.
4. Insert cleaned or new small filters (Deodorizing and
Electrostatic) back into the unit.
After putting the connection ter-
minal into electric dust collector,
insert the electric dust colloctor
into the unit.
(Only DSB-123PH)
NOTES:
• The filters should be changed every 6 months.
If in a climate with cold winters, once a year is adequate.
• After getting rid of vinyl bag in the filter (Deodorizing and
Electrostatic), use it.
CLEANING THE INDOOR COVER
To clean the indoor cover, follow the procedures below:
1.Remove the left and right side to open the indoor cov-
er upward by two
hands.
NOTE:
Please remove or
insert the indoor
cover by two
hands.
2.Pushing forward the indoor cover.
3.Remove the indoor cover.
3.(Remove it when cleaning.)
4.Cleaning the indoor cover.
NOTES:
• Wipe the indoor cover with soft sponge or soft cloth.
• When cleaning up it in the state of opening the indoor cover, wipe it with soft cloth.
• After drying it completely in the shade, assemble it.
• If you do not so, it may cause a trouble.
• Reassembly of the indoor cover is reverse process of assembly
Caution : When you remove the electric dust collector,
you must remove the power plug.
(Only DSB-123PH)
(Only DSB-123PH)
DSB-123L/LH/AH/123PH/F123L 2003.3.4 1:58 PM 페이지19
