18
1.Press the ON/OFF button on the
remote control to turn the unit
on; the On LED will light on the
indoor unit and “ON” will light in
the remote display.
2.Press the MODE button to select the
desired mode. Then, set the desired
temperature using the TEMP. ▲ or ▼
buttons.
3.
Press the SLEEP button on the re-
mote controller. The unit will then be
in the sleep mode and will cool the
room to the desired temperature. After
a while the unit will increase the tem-
perature again. This process will then
repeat.
TO SET UNIT TO SLEEP MODE
When you are going to sleep, select this feature and the unit will cool off the room to the desired temperature and then
increase that temperature throughout the night.
1.Open the indoor unit’s cover and
press
the EMER-
GENCY/REMOTE button.
3.
To turn the unit off, press the
EMERGENCY/ RE-
MOTE button again.
2.The unit will then turn on and depending on the room
temperature, it will select the cool or dehumidifier, fan
speed and fan direction automatically.
EMERGENCY OPERATION
If the remote control is lost, broken or has no batteries, follow the procedures below:
TO CANCEL SLEEP MODE:
To cancel sleep mode,
press the SLEEP button
again; the SLEEP indicator
will disappear in the dis-
play.
1. The unit is fixed “MILD” mode on production.
2. Press the “TURBO/MILD” button for powerful operation.
3. When press the “TURBO/MILD” button one more time, it will be back to “MILD” mode.
TO SET TURBO/MILD MODE
