618002
9
Verklein
Vergroot
Pagina terug
1/9
Pagina verder
ANTENNA
Antenna: for FM reception, the unit is provided with
a FM WIRE ANTENNA, move the wire until the
reception is clear and with no interferences. For
AM reception, the unit is provided with a directional
build-in ferrite antenna. Rotate the set to find the
position in which the best reception is obtained. Do
not connect the EXTERNAL FM ANTENNA to any
outside antenna.
Mute
EQ
5 6
Sleep
Basic Operation
Basic Operation
To listen to a preset station
AM/FM Tuning
Programming Radio Stations
11 Press TIMER / on the remote again to complete
timer on/off setting. Icon "
" will keep display on
LCD if timer is set.
Note: The wake up sound level will be increased
gently to preset volume level.
12 Press TIMER / on the remote control to turn
on/off the timer. The icon "
" will be on/off
respectively.
Sleep mode allows the unit to operate for a pre-set
amount of time, and then automatically turns off.
On the remote control, press SLEEP/
repeatedly
to select the desired time period options (in minutes):
- Display shows in sequence: SLEEP 90, 80, 70,
60, 50, 40, 30, 20, 10
- Display shows the selected option briefly
and returns to its previous status.
To deactivate the sleep timer, press SLEEP/ again
to 00  or Press POWER / to switch the unit into
standby mode.
You can temporarily switch off the sound without
switching off the unit.
1 Press MUTE /
on the remote control to switch
off the sound, playback continues without sound.
2 To switch on the sound , you can:
- press MUTE / again;
- adjust the volume controls;
- change source
Press EQ /
on the remote control to select desired
EQ mode.
5 modes preset EQ:
1 Press the FUNCTION / to set the unit to
TUNER mode.
2 Press STOP/BAND / repeatedly to select
your desired waveband. FM or AM
3 Auto Tuning  Press and hold FF/ or FB /
until stations begin to scan. The unit will
automatically tune to the first available station
with sufficient reception. If a station is received
in stereo, (ST) will show on the display. Repeat
step 3 if necessary until you find your desired
station.
4 Manual Tuning  Press FF/
or FB / briefly
and repeatedly until found a station.
You can store up to a total of 40 radio stations
(20 FM and 20 AM) in the memory, manually or
automatically (Autostore)
1 Tune to your desired station
2 Press PROGRAM /
to activate programming,
icon  MEMORY and P01 will start flashing.
3 Press PRESET + / or PRESET  / to
allocate a number from 1 to 20 stations.
4 Press PROGRAM /
to confirm, display shows
the preset number waveband and the frequency
of the preset station.
5 Repeat steps 1-4 to store other stations to listen
to a preset station. Press PRESET + /
or
PRESET  /
once or more until the desired
preset station in displayed.
Press PRESET + /
or PRESET  / once or
more until the desired preset station in displayed.
Automatic programming radio stations
Automatic programming will station preset 1, from
this preset number upwards, former programmed
tuner stations will be erased.
1 Press and hold PROGRAM / button
until Auto appears
- Icon  memory will start flashing
- Available stations are programmed.
- After all stations are stored, the last preset
station will then be played.
9

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Crosley CR7002A Troubadour bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Crosley CR7002A Troubadour in de taal/talen: Engels als bijlage per email.

De handleiding is 0,49 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info