618002
8
Verklein
Vergroot
Pagina terug
1/9
Pagina verder
Accessory: ADAPTER FOR 45 RPM
4
Cassette Operation
Basic Operation
Setting the Timer
Basic Operation
7
Turntable
Turntable Operation
Function Select
1 Press the FUNCTION / to set the unit to
PHONO mode.
2 While in Phono mode, insert a prerecorded
tape through the CASSETTE DOOR.
3 Adjust the volume level by turning the VOLUME
DOWN/UP KNOB / .
4 For fast forwarding, press the EJECT/F.F. half
way in. Pressing again will stop the fast
forwarding and return the cassette to the
playing mode.
5 To stop and eject the cassette, press the
EJECT/F.F. in completely.
6 When one side of the tape finishes playing, the
cassette will automatically stop.
Note: 1. Remove the tape from the unit when
it is not in use or stopped.
2. Phono function is disabled while a
cassette is in use.
PREPARING TO USE THE TURNTABLE
1 Lift up lid and remove black tie-wrap by untwisting
and gently sliding out from TONE ARM .
2 Remove cardboard shipper.
3 Remove white protective needle cover by gently
pulling towards front of unit.
4 Release TONE ARM and hold-down clip by
gently pushing to the right. This will unlock tone
arm from its ARM REST .Re-lock the hold-down
clip when moving the unit to another location.
1 Press the FUNCTION /
to set the unit to
PHONO mode.
2 Set the SPEED CONTROL SWITCH to the
correct speed (33 1/3, 45 or 78 rpm) for the
selected record.
3 Use the CUE LEVER to raise the TONE ARM
off its rest. To start the record, move the TONE
ARM to the right until you hear a click. The
turntable will start to turn.
4 Move the TONE ARM left and use the CUE
LEVER to lower it to the point where you want
the record to start.
5 At the end of the record, the TONE ARM will
stop. You must return it to its rest by hand.
To play a 45 rpm record, remove the adaptor by
placing thumb & forefinger in recesses and pulling
it upwards. Then placing it on the SPINDLE. The
record can then be placed on the turntable.
1 Press FUNCTION /
to select among:
2 When the unit is on, press POWER /
to
switch the unit off. LCD backlight will be turned
off and shown message GOOD BYE for 2
seconds, then the STANDBY LED is turned on.
Note: In the standby mode, EQ setting, sound
settings tuner presets and the volume level (up to
a maximum volume level of 30) will be stored in the
units memory.
After connecting the system to power supply, set
the clock first.
1 Press POWER/
to switch the unit to Standby
mode.
-The display shows the time
-0:00 flashes by default if you have not set the
clock
2 In the Standby mode, press and hold
PROGRAM /
over 1 second.
-The hours digit starts flashing
3 Press the FF/
or FB / repeatedly to set
the hours.
4 Press PROGRAM /
again to confirm.
The minutes digit starts flashing
5 Hold down FF/
or FB / repeatedly to set
the minutes.
6 Press PROGRAM / again to confirm.
The minutes digit stop flashing, the clock begins
to run.
7 Press PROGRAM /
to select between 12
and 24 hours, shown as below
The unit can be used as an alarm clock, whereby
the selected source (CD, TUNER, USB, SD CARD
OR PHONO) to start playback at a preset time.
Make sure the clock is set before using the timer.
1 In the standby mode, press and hold
TIMER /
over 1 second, icon " " and
message TURN ON start flashing. Press
TIMER / again to begin the SYSTEM
POWER ON timer setting.
2 Press FF/ or FB / repeatedly to set
hours.
3 Press TIMER / to enter minutes setting
mode.
4 Press FF/ or FB / repeatedly to set
minutes.
5 Press TIMER /
again to begin SYSTEM
POWER OFF timer setting.
Icon "
" and message TURN OFF start
flashing.Press TIMER /
again to begin timer
setting.
6 Press FF/ or FB / repeatedly to set
hours.
7 Press TIMER / on the remote to enter
minutes setting mode.
8 Press FF/ or FB / repeatedly to set
minutes.
9 Press TIMER / again to begin setting the
source from wake up.
Default at TUNER mode. Message TUNER
start flashing.
10 Press FUNCTION /
to select wake up
source.The unit will be waked up from last
tuned station if TUNER mode is selected.
Setting The Clock
8

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Crosley CR7002A Troubadour bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Crosley CR7002A Troubadour in de taal/talen: Engels als bijlage per email.

De handleiding is 0,49 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info