618002
5
Verklein
Vergroot
Pagina terug
1/9
Pagina verder
The system support deleting previous recorded
MP3 or existing files.
1 In USB or SD card playback mode, press and
hold REC/ERASE /
for 2 seconds, current
playback track is stopped and will be deleted.
2 Message  delete  is displayed
Delete MP3 tracks
From CD TO USB/SD
The system is capable to convert whole CD disc to
MP3 format and copy to USB mass storage device
or SD card. And also have the ability to copy one
single MP3 track to and from on USB/SD card.
1 In CD playback mode, press REC / to start
ripping to USB/SD card (default USB if both
device are detected), playback will be stopped
and skipped back to the beginning of current
track, system will scan the contents of USB/SD
card and create folder to store MP3 track.
Resume CD playback and start ripping from the
moment. The corresponding target device icon
 USB  /  CARD  start flashing.
2 Press STOP/BAND /
to exit CD ripping.
From AUX To USB/SD
1
10
Getting Started
Unpacking Power Source
USB/SD Operation
1 Remove packing materials from unit.
Note: Save all packing materials
2 AC Adaptor and Remote Control are located on
the outside of the Styrofoam packaging.
3 Remove plastic bag covering radio and remote
control.
4 Untie antenna wire on back of radio.
5 Open lid and remove Styrofoam shipping
material from turntable.
6 Remove black tie-wrap from under the TONE
ARM
7 Remove white protective needle cover by gently
pulling towards the front of the unit.
SET UP
1 Plug the small end of the AC adaptor into the
DC jack on the back of unit and plug the adaptor
into an appropriate outlet.
2 Untie the FM antenna and allow it to hang
down in a straight line for optimum FM
reception. If you have trouble tuning in an
FM station, move the external FM antenna for
best reception. Do not connect FM antenna to
outside antenna.
Connect the AC Adaptor to the wall socket. This
system switches to Standby mode automatically
and LCD would shown as below
To switch the unit on, press POWER /
LCD
backlight will be turned on.
STANDBY LED is turned off and displayed as below.
The system is capable to convert audio signal from
AUX input to MP3 format and store in USB mass
storage device or SD card (default USB if both
devices are detected).
1 Press FUNCTION / once or more to select
AUX
2 Press REC / to start ripping, the system will
scan the contents of USB / SD card and create
folder to store MP3 track.
3 Icon REC and message  RIPP TO  are
displayed, icon  AUX  start flashing.
2 Press REC / to start ripping, the system will
scan the contents of USB/SD card and create
folder to store MP3 tracks.
3 Icon  REC  and message  RIPP TO are
displayed, icon  PHONO  start flashing.
4 The target device icon  USB  or  CARD 
start flashing as ripping begins.
5 Press STOP/BAND / to exit PHONO ripping
4 The target device icon  USB  or  CARD 
start flashing as ripping begins.
5 Press STOP/BAND /
to exit AUX ripping
Note: The message  NO FUNCT  will be displayed
if any key pressed during AUX ripping process.
The message  NO DEV  will be shown if neither
USB or SD card not detected. The message
FULL  will be displayed if not enough memory in
target device.
1 In CD-MP3, USB or SD card playback mode,
press REC / to start MP3 copying from CD
to USB/SD card, or USB to SD card or vice
versa. Playback will be stopped and system will
scan the contents of USB/SD card and create
folder to store MP3 track.
2 icon  REC displayed
3 Message COPY 01 will be displayed, the
proportional copied percentage will be shown
on the decimal number.
4 The target device icon USB or CARD start
flashing, the decimal number will be increment
from 01 as MP3 copying starts, the process will
stop as it reach 100
5 Current MP3 will be playback from beginning
MP3 Copying
5

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Crosley CR7002A Troubadour bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Crosley CR7002A Troubadour in de taal/talen: Engels als bijlage per email.

De handleiding is 0,49 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info