468917
18
Verklein
Vergroot
Pagina terug
1/23
Pagina verder
Multiple-event TotalRecall™
The system’s non-volatile memory records the identity of the last eight activated or
malfunctioning triggers and/or sensors, which allows your installer to instantly track down
malfunctions and save you substantial servicing costs. To identify the triggers and/or sensors
held in the system’s non-volatile memory, simply perform the following procedure:
1. With the ignition OFF, flick the PlainView valet switch to its latched side.
2. Press button I to “arm” the system, then again to “disarm.”
3. The LED will blink 1–6 times to indicate the most recently activated trigger or
sensor, pause, then blink 1–6 times to indicate the next most recently activated
trigger or sensor, and so on for the last 8 activations (beginning with the most recent).
4. Write down the number of blinks between pauses and refer to the chart below:
Number of LED blinks per cycle Trigger/sensor that was activated or malfunctioned
1 blink
Magnetic Resonance Sensor
2 blinks
Glass tampering sensor
3 blinks
Door trigger
4 blinks
Trunk trigger
5 blinks
Hood trigger
6 blinks
Proximity Sensor or other optional sensor
Headlight reminder
If you turn the ignition off and open the driver’s door to exit the car without having turned
off the headlights, you will be reminded to turn them off with a distinctive warning tone.
If your vehicle already has a similar warning feature, you may turn off your Concept
50’s Headlight Reminder. See the User-selectable features section on pages 19–21.
Remote QuickAccess™
For the greatest ease of use, the Remote QuickAccess features permit you a quick and
easy way of controlling, with just the remote, the most commonly used features. You
can control either of these features any time via your remote control. Here’s how:
QuickAccess Valet Mode: To enter valet mode remotely, transmit channel 10
(press the LevelShift button on the side of the remote control twice, then press
button 2). The parking lights will flash twice and the dashboard LED will stay on
to indicate the system is in valet mode. To exit valet mode remotely, transmit
channel 10 again and the system will exit of valet mode with one parking light
flash and the LED will turn off. (NOTE: If you enter valet mode via the remote
control, exit valet mode in the same manner. If you use the PlainView switch to
enter valet mode, use the switch to exit valet mode.)
QuickAccess Long-Term Chirp Silencing: To silence the chirps, transmit channel 9
(press the LevelShift button on the side of the remote control twice, then press
button 1). The parking lights will flash twice to indicate that long-term chirp
silencing is on. To restore the chirps, transmit channel 9 again and the system will
confirm restoration of the chirps with one flash of the parking lights.
16
18

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Clifford Concept 50 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Clifford Concept 50 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,11 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info