624852
12
Verklein
Vergroot
Pagina terug
1/15
Pagina verder
E-88
To measure two fi nishes
A
C
A C
C
Start Split
First runner fi nishes.
(
SP
appears on the
digital display.)
Display time of fi rst
runner
Stop
Second runner
nishes.
Split release
Display time of
second runner
Reset
Note
The Stopwatch Mode can indicate elapsed time up to 23 hours, 59 minutes, 59.99 seconds.
Once started, stopwatch timing continues until you press
A
to stop it, even if you exit the Stopwatch
Mode to another mode and even if timing reaches the stopwatch limit defi ned above.
Exiting the Stopwatch Mode while a split time is frozen on the display clears the split time and returns
to elapsed time measurement.
E-89
Using the Countdown Timer
The countdown timer can be confi gured to start at a preset time, and sound an alarm when the end of the
countdown is reached.
To enter the Countdown Timer Mode
Use
B
to select the Countdown Timer Mode (
TIMER
) as shown on page
E-30.
About one second after
TIMER
appears on the display, the display will
change to show the countdown time hours.
To specify the countdown start time
1. Enter the Countdown Timer Mode.
2. Pull out the crown.
This will cause the current start time minutes digits to fl ash on the
digital display.
The timekeeping (hour, minute, second) hands will move to 2
o’clock.
3. Rotate the crown to adjust the minutes setting.
You can also use HS1 high-speed movement (page E-5) to change
this setting.
To set a starting countdown time of 60 minutes, set 00’00.
4. After the setting is the way you want, push the crown back in.
Countdown time
(Minutes, seconds)
Current time
Countdown time
(Minutes, seconds)
Current time
E-90
To perform a countdown timer operation
A
A
A A
C
Start Stop (Resume) (Stop) Reset
Before starting a countdown timer operation, check to make sure that a countdown operation is not in
progress (indicated by the seconds counting down). If it is, press
A
to stop it and then
C
to reset to
the countdown start time.
An alarm sounds for ten seconds when the end of the countdown is reached. This alarm will sound in
all modes. The countdown time is reset to its starting value automatically when the alarm sounds.
Pulling out the crown while a timer operation is in progress will stop the operation and reset the time to
the start time.
To stop the alarm
Press any button.
E-91
Using the Alarm
You can set fi ve independent daily alarms. When an alarm is turned on,
an alarm will sound for about 10 seconds each day when the time in the
Timekeeping Mode reaches the preset alarm time. This is true even if the
watch is not in the Timekeeping Mode.
You can also turn on an Hourly Time Signal, which will cause the watch
to beep twice every hour on the hour.
To enter the Alarm Mode
Use
B
to select the Alarm Mode (
ALARM
) as shown on page E-30.
About one second after
ALARM
appears on the display, the display
will change to show an alarm name (
AL1
through
AL5
) or the
SIG
indicator. The alarm name indicates an alarm screen.
SIG
is shown
when the Hourly Time Signal screen is on the display.
When you enter the Alarm Mode, the data you were viewing when you
last exited the mode appears fi rst.
Alarm name
(AL- or SIG)
Alarm time
(Hour : Minutes)
Hourly Time Signal screen
Alarm 1 screen
Alarm name
(AL- or SIG)
Alarm time
(Hour : Minutes)
Hourly Time Signal screen
Alarm 1 screen
E-92
To set an alarm time
1. In the Alarm Mode, use
A
and
C
to scroll through the alarm screens
until the one whose time you want to set is displayed.
AL1 AL2 AL3
SIG* AL5
AL4
* There is no time setting for the hourly time signal.
2. Pull out the crown.
This will cause the hour and minute digits of the alarm time to fl ash.
The timekeeping (hour, minute, second) hands will move to 2 o’clock.
3. Rotate the crown to adjust the minute setting.
You can also use HS1 high-speed movement (page E-5) to change this setting.
Hour setting will change in accordance with minute setting changes. To change the hour setting
separately, go to step 4 of this procedure.
4. Press
B
.
5. Rotate the crown to adjust the hour setting.
You can also use HS1 high-speed movement (page E-5) to change this setting.
If you are using 12-hour timekeeping, the P (p.m.) and A (a.m.) indicators will also appear on the
display.
Alarm ON/OFF indicatorAlarm ON/OFF indicator
E-93
6. After the settings are the way you want, push the crown back in.
Setting an alarm time causes that alarm to turn on automatically.
To turn an alarm and the Hourly Time Signal on and off
1. In the Alarm Mode, use
A
and
C
to select an alarm or the Hourly Time Signal.
2. When the alarm or the Hourly Time Signal you want is selected, press
D
to turn it on and off.
The alarm on indicator (when any alarm is on), and the Hourly Time
Signal on indicator (when the Hourly Time Signal is on) are shown on
the display in all modes.
To stop the alarm
Press any button.
To test the alarm
In the Alarm Mode, hold down
A
to sound the alarm tone.
Hourly time signal
on indicator
Alarm on indicator
Hourly time signal
on indicator
Alarm on indicator
E-94
Checking the Current Time in a Different Time Zone
You can use the World Time Mode to display the current time in any one for 29 time zones (29 cities)
around the world, and in the UTC (Universal Time Coordinated) time zone. The city that is currently
selected in the World Time Mode is called the “World Time City”.
Your watch includes functions for quickly swapping your Home City and World Time City settings, and
for one-touch access to the UTC time zone.
To enter the World Time Mode
Use
B
to select the World Time Mode (
WT
) as shown on page E-30.
This causes
WT
to appear on the digital display. After one second, the
hour and minute hands move to indicate the time in the current World
Time City. The second hand points to the city code of the currently
selected World Time City.
The digital display shows the current time in the Home City.
To check whether the indicated World Time City time is a.m. or p.m.,
press
A
. This will cause the second hand to move to
A
(a.m.) or
P
(p.m.) The second hand will return to regular timekeeping after about
three seconds.
Pressing
D
will cause the second hand to move to the currently
selected World Time City city code. The second hand will return to
regular timekeeping after about three seconds.
Currently selected
Word Time City
Current timekeeping
Mode time
Current time in the currently
selected World Time City
Currently selected
Word Time City
Current timekeeping
Mode time
Current time in the currently
selected World Time City
E-95
To confi gure World Time City and summer time settings
1. In the World Time Mode, pull out the crown.
This will cause CITY to fl ash on the digital display.
2. Rotate the crown to move the second hand to the City Code you want
to select.
The currently selected World Time City will be indicated by the
second hand.
3. Press
B
.
This will cause the current DST setting (DST ON or DST OFF) to
fl a s h o n t h e d i s p l a y .
4. Rotate the crown to select either on (
DST ON
) or off (
DST OFF
) for the
DST setting.
5. After the settings are the way you want, push the crown back in.
Note that you cannot switch between standard time/daylight
saving time (DST) while UTC is selected as the World Time City.
Note that the standard time/daylight saving time (DST) setting
affects only the currently selected time zone. Other time zones are
not affected.
DST indicatorDST indicator
Operation Guide 5365
12

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Casio 5365 - PRW-6000 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Casio 5365 - PRW-6000 in de taal/talen: Engels als bijlage per email.

De handleiding is 1,97 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Casio 5365 - PRW-6000

Casio 5365 - PRW-6000 Gebruiksaanwijzing - Deutsch - 15 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info