55632
11
Verklein
Vergroot
Pagina terug
1/16
Pagina verder
11
To reset after the operation of the front guard/chain brake
assembly (4) follow the instructions for "How to set the chain
brake".
Note: Avoid re-starting the tool until you hear the motor
come to a complete rest.
Note: If chain brake in malfunctioning take the product to an
approved Black & Decker service centre.
If the saw chain (6) or guide bar (7) becomes jammed
u Switch the tool off.
u Disconnect the tool from the mains supply.
u Open the cut with wedges to relieve the strain on the
guide bar (7). Do not try to wrench the chainsaw free.
u Start a fresh cut.
Felling (g. H - J)
Inexperienced users should not attempt to fell trees. The
user may suffer injury or cause damage to property as a
result of failure to control the direction of fall, the tree may
splinter or damaged/dead branches may fall during cutting.
The safe distance between a tree to be felled and
bystanders, buildings and other objects is at least 2 1/2 times
the height of the tree. Any bystander, building or object
within this distance is at risk from being struck by the tree
when felled.
Before attempting to fell a tree:
u Make sure that there are no local by-laws or regulations
that would prohibit or control the felling of the tree.
u Consider all conditions that may affect the direction of fall,
including:
- The intended direction of fall.
- The natural lean of the tree.
- Any unusual heavy limb structure or decay.
- Surrounding trees and obstacles including overhead
lines and underground drains.
- The wind speed and direction.
Pre-plan a safe exit from falling trees or branches. Make sure
that the exit route is clear of obstacles that would prevent or
hinder movement. Remember that wet grass and freshly cut
bark is slippery.
u Do not attempt to fell trees where the tree diameter is
greater than the cutting length of the chainsaw.
u Cut a direction notch to determine the direction of fall.
u Make a horizontal cut to a depth of between 1/5th and
1/3rd of the diameter of the tree, perpendicular to the line
of fall at the base of the tree (fig. H).
u Make a second cut from above to intersect with the first
and make a notch of about 45°.
u Make a single horizontal felling cut from the other side 25
mm to 50 mm above the centre of the direction notch.
(fig. I). Do not cut through to the direction notch, you could
lose control of the direction of fall.
u Drive a wedge or wedges into the felling cut to open it and
drop the tree (fig. J).
Pruning trees
Make sure that there are no local by-laws or regulations that
would prohibit or control the pruning of the tree limbs.
Pruning should only be undertaken by experienced users
there is an increased risk of the saw chain pinching and kick
back.
Before pruning consideration should be given to
conditions affecting the direction of fall including:
u The length and weight of the branch to be cut.
u Any unusual heavy limb structure or decay.
u Surrounding trees and obstacles including overhead.
u The wind speed and direction.
u The branch being intertwined with other branches.
The operator should consider access to the tree limb and
the direction of fall. The tree branch is liable to swing towards
the tree trunk. In addition to the user bystanders, objects and
property below the branch will be at risk.
u To avoid splintering, make the first cut in an upward
direction to a maximum depth of one third the diameter of
the branch.
u Make the second cut downwards to meet the first.
Logging (g. K - M)
How you should cut depends on how the log is supported.
Use a saw horse whenever possible. Always start a cut with
the saw chain running and the spiked bumper (16) in contact
with the wood (g. K). To complete the cut use a pivoting
action of the spiked bumper against the wood.
When supported along its whole length:
u Make a downward cut, but avoid cutting the earth as this
will blunt your saw chain quickly.
When supported at both ends:
u First, cut one third down to avoid splintering and second,
cut again to meet the first cut.
When supported at one end:
u First cut one third up to avoid splintering and second, cut
down to prevent splintering.
When on a slope (g. L):
u Always stand on the uphill side.
When attempting to cut a log on the ground (g. L):
u Secure the workpiece using chocks or wedges. The user
or a bystander should not steady the log by sitting or
standing on it. Make sure that the saw chain does not
contact the ground.
11

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Black-Decker-GK1630T

Zoeken resetten

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Black Decker GK1630T bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Black Decker GK1630T in de taal/talen: Engels als bijlage per email.

De handleiding is 1,95 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Black Decker GK1630T

Black Decker GK1630T Gebruiksaanwijzing - Nederlands - 128 pagina's

Black Decker GK1630T Gebruiksaanwijzing - Nederlands - 104 pagina's

Black Decker GK1630T Gebruiksaanwijzing - Deutsch - 128 pagina's

Black Decker GK1630T Gebruiksaanwijzing - Deutsch - 104 pagina's

Black Decker GK1630T Gebruiksaanwijzing - English - 128 pagina's

Black Decker GK1630T Gebruiksaanwijzing - English - 104 pagina's

Black Decker GK1630T Gebruiksaanwijzing - Français - 128 pagina's

Black Decker GK1630T Gebruiksaanwijzing - Français - 104 pagina's

Black Decker GK1630T Gebruiksaanwijzing - Italiano - 128 pagina's

Black Decker GK1630T Gebruiksaanwijzing - Italiano - 104 pagina's

Black Decker GK1630T Gebruiksaanwijzing - Português - 128 pagina's

Black Decker GK1630T Gebruiksaanwijzing - Português - 104 pagina's

Black Decker GK1630T Gebruiksaanwijzing - Espanôl, Espanõl - 128 pagina's

Black Decker GK1630T Gebruiksaanwijzing - Espanôl, Espanõl - 104 pagina's

Black Decker GK1630T Gebruiksaanwijzing - Dansk - 128 pagina's

Black Decker GK1630T Gebruiksaanwijzing - Dansk - 104 pagina's

Black Decker GK1630T Gebruiksaanwijzing - Svenska - 128 pagina's

Black Decker GK1630T Gebruiksaanwijzing - Svenska - 104 pagina's

Black Decker GK1630T Gebruiksaanwijzing - Norsk - 128 pagina's

Black Decker GK1630T Gebruiksaanwijzing - Norsk - 104 pagina's

Black Decker GK1630T Gebruiksaanwijzing - Suomi - 128 pagina's

Black Decker GK1630T Gebruiksaanwijzing - Suomi - 104 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info