541362
19
Verklein
Vergroot
Pagina terug
1/40
Pagina verder
GL2400 User Guide 19
The GROUP / AUX Masters
AUX MASTERS
Each aux mix has a master level control that
adjusts the output level to match external equipment, or trims the
monitor, effect or other send without affecting the mix balance. Up to
+10dB boost is available above the normal 0dB position. Note that
this becomes the group or master in monitor mode.
AUX AFL Press AFL to listen to the post-level aux mix in the
headphones and local monitor without affecting the main outputs.
The console monitor meters are interrupted with the aux (group)
signal. The yellow indicator lights to show that AFL has been selected
on the master. Use AFL to check the signal being sent to the
monitors, effects or other destination. AFL is pre-mute so that you can
check the signal before sending it to its destination.
REV mode switch These switches reverse the function of the
group and aux masters, the heart of the dual functionality pioneered
by Allen & Heath. They are recessed to prevent accidental operation.
Use a pen or pointed object to set their position. In the up position
(flush with the panel), the group is controlled by the fader and the aux
by the rotary master. This is typical for FOH mode
where the faders
are used for subgroups feeding the main stereo mix. When pressed,
the aux uses the fader as the master and the group is moved to the
rotary control. The aux mix is now presented to rear Group XLR
complete with insert. The group mix appears at the Aux TRS jack.
This is used for monitor mode
where the auxes are the main mix
feeding the stage monitors. You can select any combination for the
FOH and monitor mode, for example, just 3, 4 giving you two fader
subgroups, two monitor sends on faders, and main LR mix.
Note: The groups always feed the matrix and the subgroup controls
(PAN and GRP TO LR) regardless of mode. This means the group mix
can still perform a useful function when the console is configured in
monitor mode.
PAN Positions the group signal between L and R in the stereo mix
when the GRP TO LR switch is pressed. Using pan you can create
mono or stereo groups positioned as you require in the main mix. For
stereo grouping, set the odd group pan fully to the left, and the even
group pan fully to the right. The centre position (mono image) is
detented for quick resetting. Note that the group mix always feeds
these subgroup controls regardless of FOH or monitor mode selected.
METER A 4 LED bar meter displays the post-fade group signal
(FOH mode), or aux signal (monitor mode, REV pressed).
MUTE When pressed the group (aux) signal is turned off. This
affects the feed to the output XLR, LR and matrix. The red indicator
lights when the channel is muted.
GROUP AFL Press AFL to listen to the post-fade, pre-mute group
mix in the headphones and local monitor without affecting the main
outputs. Note that this becomes the aux mix in monitor mode. The
console monitor meters are interrupted with the group (aux) signal.
The yellow indicator lights to show that AFL has been selected on that
master.
GROUP FADER A 100mm smooth travel fader controls the group
mix output level. Note that it becomes the aux mix master in monitor
mode (REV pressed). The fader provides +10dB maximum boost
above its normal unity gain 0dB position.
REV
AFL
AFL
MUTE
GRP1
PAN
TO LR
PK!
+6
0
SIG
L
R
=
OO
AUX
1
+10
0
19

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Allen-Heath GL 2400 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Allen-Heath GL 2400 in de taal/talen: Engels als bijlage per email.

De handleiding is 4,02 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info