541362
17
Verklein
Vergroot
Pagina terug
1/40
Pagina verder
GL2400 User Guide 17
AUX SENDS These rotary controls adjust how much channel
signal is mixed to the aux outputs. Each of the 6 auxes has its own
control. They adjusts from fully off to +6dB boost. Unity gain 0dB is
marked at 3 o’clock position. Auxes 1-4, 5-6 are switched pre/post.
The settings may be changed if preferred by repositioning internal
jumper link options. They offer several different combinations of pre
and post-fade sends, and a post-EQ option for the pre-fade sends.
More detail is provided in OPTIONS later in this guide.
Pre-fade aux sends are not affected by the channel fader movements.
These are typically used to feed stage monitors. In most cases users
also prefer that the monitor sends are not affected by inserted
processors or the channel EQ. Post-fade aux sends follow the
channel faders and are typically used to send a proportion of the
channel signal to an effects device such as reverb or delay. Note that
post-fade sends may be preferred when the console is configured in
monitor mode so that the faders become ‘masters’ for all monitor
mixes. Pre or post-fade sends may also be used for special
applications such as recording, zone feeds, clean feeds and aux fed
subs or centre speaker.
PRE When pressed, the pre-fade channel signal is sent to the
associated auxes. When released, the post-fade signal is sent. Auxes
1 to 4 and 5, 6 are grouped for pre/post switching. Default setting is
pre-insert, pre-EQ so that inserted compressors and EQ do not affect
the sends when mixing monitors from FOH. You can change this by
repositioning the internal option jumpers.
PAN Positions the channel signal between L/R in the stereo mix,
and odd/even if routed to the groups. The centre position (mono
image) is detented for quick resetting.
MUTE When pressed, the channel signal is turned off. This affects
the feed to the LR mix, pre and post-fade aux sends and direct output,
but does not affect the insert send. The red indicator lights when the
channel is muted. Always mute the channel when switching phantom
power or plugging the cables and sources.
PFL Press PFL to listen to the pre-fade channel signal in the
headphones and local monitor without affecting the main outputs.
The console PFL/AFL active red indicator lights and the monitor LR
meters display the channel signal. The PFL switch yellow indicator
lights to show that PFL has been selected on that channel. Selecting
more than one PFL at the same time mixes those signals together in
the monitor.
METER A 4 LED channel meter displays the pre-fader signal level.
‘SIG’ lights when a signal level of -12dBu is detected. ‘0’ lights when
the nominal 0dBu level is reached, and ‘+6’ at +6dBu. ‘PK’ lights
when the channel pre-fade signal is within 5dB of clipping. This gives
you enough warning to reduce GAIN before you hear signal distortion.
ROUTING Press L-R to route the channel signal to the main LR
mix. Press 1-2 or 3-4 to route to the groups. Use PAN to position the
signal between L/R or the odd/even group pairs. To route to a single
group set PAN fully to one side. You can route to L-R and all groups
simultaneously by pressing all switches. Check that you have set
these switches correctly before you start mixing.
FADER A high quality 100mm smooth travel fader with protective
dust cover controls the channel level feeding the main LR mix, groups
and post-fade aux sends. It also affects the direct output if this has
been set to post-fade using the internal option jumpers. The fader
provides +10dB maximum boost above its normal unity gain 0dB
position.
10k5k2k1k500200100502010
-40
-35
-30
-25
-20
-15
-10
-5
0dB
+5
+20
+15
+10
+5
0dB
-5
-10
-15
-20
20 50 100 200 500 1k 2k 5k 10k
+20
+15
+10
+5
0dB
-5
-10
-15
-20
20 50 100 200 500 1k 2k 5k 10k 20k
20k10k5k2k1k5002001005020
-20
-15
-10
-5
0dB
+5
+10
+15
+20
HPF
LF / HF
HM
LM
+1
+3
+6
-12
-16
-9
-6
-3
-1
-20
0
+9
-30
-40
-50
-60
-70
-80
-90
+12
+16
+20
SIGNAL-TO-NOISE RATIO
DYNAMIC RANGE
HEADROOM
CLIPPING
NOISE
NORMAL OPERATING RANGE
SIGNAL
!
17

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Allen-Heath GL 2400 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Allen-Heath GL 2400 in de taal/talen: Engels als bijlage per email.

De handleiding is 4,02 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info