135583
76
Verklein
Vergroot
Pagina terug
1/80
Pagina verder
12 EN
same time on the same channel every week. While the
month digit is flashing, press
PLAY/o or STOP/L
repeatedly to select “W-MO” (Example: every monday).
5) For once-only recording only : Press PLAY/o or STOP/L
repeatedly until your desired day appears.
6) Press
PLAY/o or STOP/L repeatedly until the relevant
start hour appears. Next, enter the minute digit.
7) Press PLAY/o or STOP/L repeatedly until the relevant
end hour appears. Next, enter the minute digit.
8) Press PLAY/o or STOP/L repeatedly until the relevant
channel number appears.
9) Press
PLAY/o or STOP/L repeatedly until the desired
tape speed appears.
10)Press F.FWD /B. Programme 1 is now completed.
To set another timer programme, repeat steps
3) to 10).
11)Press
MENU to exit.
12)Press
FUNCTION to activate the timer.
The
w indicator on the display comes on.
To Stop a Timer Programme which has Already
Started
Press STOP/EJECT on the VCR.
Note: STOP/L on the remote control will not function in the
Timer Recording mode.
To Correct Timer Programmes
If you want to correct an automatic timer after you finished
setting programme,
1) Repeat steps 1) to 3) in the “Timer Recording” section.
2) Select the setting you want to change using
F.FWD/B or
REW/s.
3) Enter the correct numbers using
PLAY/o or STOP/L,
then press
F.FWD/B.
4) Press
MENU to exit.
5) Press
FUNCTION to return to timer standby mode.
To Cancel or Check the Start/End Time
1) Repeat steps 1) to 2) in the “Timer Recording”.
2) Select a programme number you want to check using
PLAY/o or STOP/L. The details of selected programme
appears on the TV screen. You may cancel the entire
programme by pressing
REW/s.
3) Press
MENU to exit.
Avoid Overlap of TIMER Programmes...
A timer programme does not work while another programme
is under execution.
Hint for Timer Recording
If there is a power failure or if the VCR is unplugged for
more than 30 seconds, the clock setting and all timer
settings will be lost.
If the tape runs out before the end time, the VCR will
switch to the Stop mode immediately, eject the tape and the
VCR power will be turned off. The w indicator will flash.
If a tape is not in the VCR, timer recording cannot be
performed and the w indicator flashes. If an erase-
prevention tab of the tape is missing, the tape will be
ejected and the w indicator will flash. Please insert a
recordable tape.
When all the Timer Recordings are completed, the w also
flashes. To play or eject the recorded tape, press
FUNCTION
first
, and then press PLAY/o or EJECT. To rewind the tape
to the beginning of the recorded programmes, press
AUTO RETURN on the VCR.
The TV that is connected to your VCR may be turned on
or off when the VCR is in the Timer-recording mode.
The VCR will only perform a timer recording after it has
been placed into timer standby mode.
Auto Return
Using the AUTO RETURN Button
When all the Timer Recordings are completed (the w
indicator flashes), press
AUTO RETURN on the VCR first. The
VCR will rewind to the beginning of the recorded
programme(s).
Note: If there are any remaining programmes, press
FUNCTION to turn on the VCR and then press
AUTO RETURN. In this case, if you press any other
button once and then press
AUTO RETURN, AUTO
RETURN will not be carried out.
Using the VCR Menu
If there are any remaining programmes including Daily,
Everyday, & Weekly, AUTO RETURN will not operate.
1) Press
MENU.
2) Press
PLAY/o or STOP/L repeatedly to point to “SET
UP”, then press
F.FWD/B.
3) Press
PLAY/o or STOP/L to point to “AUTO
RETURN”, then press
F.FWD/B.
[ON] will appear next to “AUTO RETURN”.
4) Press MENU.
Watch the Recorded Timer Programme
Press FUNCTION to turn on the VCR, then press PLAY/o.
Parents Lock
Parents Lock prevents use of the VCR by making the VCR
feature buttons on the VCR and the remote control
inoperative.
The PWR indicator on the display comes on.
1) Press and hold down
FUNCTION on the remote control for
5 seconds until “PL” appears on the display. The Parents
Lock is activated.
When you want to cancel it, press and hold
FUNCTION on
the remote control again for 5 seconds.
When Parents Lock is activated:
The time will appear on the display. “PL” will appear on
the display for two seconds every minute.
You may insert a tape. However, the VCR power will
remain off.
You may press EJECT to remove the tape (unless a timer
recording is programmed or has finished).
Timer recording will take place as scheduled, even if
Parents Lock is activated. “P.L.” will appear steadily on the
TV screen during the timer recording.
MENU
TIMER
SET UP
INITIAL
TIMER NUMBER
1
START
END
DATE
CHANNEL
SPEED
--/--
--:--
--:--
--
--
9:00 10:00 11:00
Programme 1
Programme 2
Programme 3
HG462ED(EN).fm Page 12 Wednesday, March 3, 2004 7:49 PM
76

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw AEG vcr 4500 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van AEG vcr 4500 in de taal/talen: Duits als bijlage per email.

De handleiding is 4,84 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info