65
ENGLISH
12. Current Time and Timer
12.1 Current Time
In DVB-T mode the TV set automatically detects the current time. In ATV mode the current time can be set manually.
1. Press the TV MENU button to display the OSD main menu.
2. Press the arrow button until the menu TIME is activated.
3. Press the arrow button to highlight Clock.
4. Press OK to access the function.
5. Enter the values such as date with the arrow buttons / .
6. Press EXIT to exit the menu and save the settings.
12.2 On Time and O Time
On Time and O Time dene the time when the TV set turns on and o. You can dene dierent periods.
NOTE:
These functions turn your TV set on from standby mode or into standby mode. If your TV set is turned o with the main
switch this functions is invalid.
1. Press the TV MENU button to display the OSD main menu.
2. Press the arrow button until the menu TIME is activated.
3. Press the arrow button to highlight O Time or On Time.
4. Press OK to access the function.
5. Press the arrow buttons to highlight and change the displayed functions.
O Time:
- O Time: Dene if the setting is to be performed once or regularly. Select
between: (O, Once, Daily, Mon-Fri, Mon-Sat, Sat-Sun or Sun).
- Hour / Minute: Set the o time.
On Time:
- On Time: Dene if the setting is to be performed once or regularly. Select
between: (O, Once, Daily, Mon-Fri, Mon-Sat, Sat-Sun or Sun).
- Hour / Minute: Set the on time.
- Mode: DTV - if DVBT antenna is connected / ATV – if external antenna or
cable tuner is connected.
- Channel: Set the channel number that the TV set turns on with.
- Volume: Set the volume that the TV set turns on with.
6. Press TV MENU to exit the menu and save the settings.
12.3 Sleep Timer
You can set your TV set to automatically turn o after a preset period of time. The sleep timer is deleted and must be set
again if you turn the TV set o during sleep timer setting. Set the sleep timer interval between O and 240Min.
• Repeatedly press the SLEEP button on the remote control until the desired time is displayed. The menu disappears
after a few seconds and the TV set turns o after the preset interval.
NOTE: You can also perform this setting in the TIME menu.
12.4 Auto Sleep
With auto sleep activated the TV set automatically turns into standby mode after not receiving a signal for 10 minutes.
1. Press the TV MENU button to display the OSD main menu.
2. Press the arrow button until the menu TIME is activated.
3. Press the arrow button to highlight Auto Sleep.
4. Press OK to on or o the function.
5. Press EXIT to exit the menu and save the changes.
