533793
97
Verklein
Vergroot
Pagina terug
1/100
Pagina verder
Troubleshooting
96
Troubleshooting
If you have any problems during operation of the R16, check the following points first.
Problems during playback •••••••••••••••••
No sound, or sound is very weak.
Check the connections to your monitoring system
and the volume settings of the system.
Make sure that status keys in the mixer section are
lit green (except the [MASTER] status key) and
that faders are raised. If a key is not green, press it
repeatedly until it lights green.
Make sure that the [MASTER] status key is not lit and
that the [MASTER] fader is raised.
Moving the fader does not affect the volume.
On channels for which stereo link is turned on,
the fader of the even-numbered channel will have
no effect. Either turn stereo link off (P.20), or
use the fader of the odd-numbered channel in
the pair.
No sound from input signal, or sound is very weak.
Make sure that the [GAIN] control for the
respective input is increased.
Check that the status light is green (playback
enabled) and that the fader of the track is raised.
An operation does not work and the message “Stop
Recorder” is shown on the display.
Some operations are not possible while the
recorder is operating. Press the [STOP] key
to stop the recorder and then conduct the
operation.
Problems during recording ••••••••••••••••
Cannot record on a track.
Make sure that you have selected and enabled a
recordable track.
Check whether you have run out of free space on
the SD card (P.70).
Recording is not possible if the project is
protected. Either set “PROTECT” to “OFF”
(P.54), or use a different project.
The recorded sound is distorted.
Make sure that the [GAIN] (input sensitivity) and
recording level are not set too high.
Lower the fader so that the 0 (dB) indicator of the
level meter does not light.
If the EQ gain of the track mixer is set extremely
high, the sound may be audibly distorted even if
the fader is lowered. Set the EQ gain to a lower
value.
When an insert effect is applied to an input,
check whether the effect output level (patch
level) setting is appropriate.
Problems with effects ••••••••••••••••••••
Insert effect cannot be inserted.
When using the 8x COMP EQ algorithm, the
selection of insert points is limited (P.49).
Insert effect does not work.
Check that the “INSERT EFFECT” icon is shown
on the display. If it is not shown, press the [INSERT
EFFECT] key and then press [ENTER] to enable
it.
Make sure that the insert effect is inserted in the
desired location (P.49).
Send/return effect does not work.
Check that the “CHORUS/DELAY” icon is shown
on the display. If it is not shown, press the SEND
RETURN EFFECT key and then press [ENTER] to
enable it.
Make sure that the send level for the track is
raised (P.37, 48).
Other problems •••••••••••••••••••••••••
Cannot save a project.
The project cannot be saved if the project is
protected. Set “PROTECT” to “OFF” (P.56).
Cannot create a new project or copy a project.
If “Project Full” appears on the display, all the
memory available on the card has been used.
Delete unneeded projects to free up memory.
An error message is shown when attempting to
execute a command.
Please check the error message list (P.44).
97

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Zoom-R16

Zoeken resetten

  • Graag zou ik een nederlandse handleiding willen van de zoom r16 en r24,en in de vragen te zien nog andere gebruikers ook.
    Als jullie ons daar aan zouden kunnen helpen zou dat erg fijn zijn omdat engels en duits niet makkelijk is in audio taal. best technisch allemaal.
    met vriendelijke dank. Gesteld op 9-2-2015 om 15:57

    Reageer op deze vraag Misbruik melden
  • Hoe kan ik een opgenomen track wissen? Als ik zingend een vorige opname wil overwriten dan hoor ik de vorige opname er hinderlijk doorheen Gesteld op 25-11-2014 om 11:49

    Reageer op deze vraag Misbruik melden
    • Hallo, misschien heb je ondertussen al je antwoord, maar hier toch mijn antwoord op je vraag. Als je een opname maakt dan wordt dat een file. Die file kun je wissen door naar 'project' te gaan. Klik dus op het knopje rechtsboven op de Zoom bij 'project'. Daar kun je naar 'File' gaan en dan kun je alle opgenomen files van dat project zien. Je kunt ze ook beluisteren als je niet zeker weet welke het is. Vervolgens kun je de file wissen. Succes! Geantwoord op 9-2-2015 om 16:05

      Waardeer dit antwoord (1) Misbruik melden

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Zoom R16 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Zoom R16 in de taal/talen: Engels als bijlage per email.

De handleiding is 33,69 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Zoom R16

Zoom R16 Gebruiksaanwijzing - Deutsch - 100 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info