540082
47
Verklein
Vergroot
Pagina terug
1/50
Pagina verder
49JE1000-001_v01
Technical data
The technical data are given on the name plate.
Maximum continuous operation time: 10 minutes
Time interval between successive uses: 15 minutes
Noise level (L
WA
) 80 dB/A
The juice extractor type JE1000 does not require connection
to a grounded socket .
ZELMER appliances satisfy the requirements of relevant
standards.
The appliance meets the requirements of the following
directives:
Low Voltage Device (LVD) – 2006/95/EC;
Electro-Magnetic Compatibility (EMC) – 2004/108/EC.
The product is marked with CE symbol on the name plate.
Construction of the appliance (Fig. A)
1
Motor unit
2
Suction cups
3
Power cord
4
Power on/off button, level 1 – level 2
5
Locking clamps
6
Fasteners
7
Skimmer
8
Juice bowl
9
Spout
10
Pulp container
11
Strainer
12
Lid
13
Pusher
14
Jug
15
Froth separator
16
Brush
Preparing for operation (disassembling) (Fig. B)
Before rst use, disassemble the appliance,
wash and dry all attachments in contact with
the processed fruit or vegetables.
1
Place the appliance on a clean hard, and dry surface
near a wall socket.
2
Hold the locking clamps (5) from below on both sides
and pull away from the motor unit.
3
Lift locking clamps (5) to release the lid (12) and lower
when released.
4
Remove the pulp container (10) and the pusher (13).
Remove the lid (12) and the juice bowl (8) together with the
strainer (11).
Wash all parts (except the motor unit) carefully
in hot water with wash-up liquid. You can
also clean them in a dishwasher at max. 60°C
(except the strainer and the motor unit). Once
clean, replace the parts after drying them rst
thoroughly.
Assembling the appliance (Fig. C)
1
Place the juice bowl (8) on the motor unit (1), inserting
the spout (9) in the opening of the motor unit casing.
2
Mount the strainer (11) on the skimmer (7), press it all the
way in, and check if it is well mounted and swivels easily.
3
Place the lid (12) on the juice bowl (8).
4
Lift up both clamps (5) and x them on to the fasteners
(6) located on the lid.
5
Press the clamps (5) to the motor unit (1) (you will hear
a characteristic click).
6
To mount the pulp container (10) under the lid (12),
proceed as follows: lean the pulp container (10) and place
it under the juice bowl (8). Then slide it in towards the motor
unit (1). Place the Jug (14) under the spout (9).
If you fail to assemble any of the parts (e.g. the
juice bowl, lid, pulp container or locking
clamps) or do it improperly, a safety device will
prevent the switch-on of the appliance.
Starting and operating the juice
extractor (Fig. D)
Make sure that the power on/off button is set to
“0”.
Unwind a sufcient length of the cord. The remaining
cord can be stored inside the drive housing. Slip the
remaining cord through an opening located at the side
of the appliance.
1
Insert the power cord (3) plug into the socket and
press the on/off button (4) to start the appliance, selecting
speed level 1 (position I low rotation speed for soft fruit
and vegetables such as raspberries, tomatoes, cucumbers,
Tip
Product information and tips for use
Thoroughly clean all parts of your appliance before the
rst use.
The appliance is intended for domestic use. In case
it is used for food business purposes, the warranty
conditions shall change.
47

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Zelmer JE1000 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Zelmer JE1000 in de taal/talen: Engels, Pools als bijlage per email.

De handleiding is 1,89 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info