540086
64
Verklein
Vergroot
Pagina terug
1/66
Pagina verder
66
Technical specications
Technical parameters are indicated on the appliance’s name
plate.
Admissible continuous operating time of the motor with
15 minutes
A break between successive uses 30 minutes
A break between successive turbo uses 10 seconds
The appliance’s noise level (L
WA
) 75 dB/A
Speed range I gear, II gear
The juice extractor type 477 is constructed in II class
insulation .
It does not require connection to the grounded socket.
ZELMER appliances meet the requirements of effective
standards.
The appliance meets the requirements of the following
directives:
Low Voltage Device (LVD) – 2006/95/EC.
Electro-Magnetic Compatibility (EMC) – 2004/108/EC.
The product is marked with CE symbol on the name plate.
Construction of the appliance (Fig. A)
1
Motor
a
power on/off button
b
gear 1 – gear 2 / turbo button
c
indicator light
d
pulse button (does not apply in case of juice extractor)
e
skimmer
f
sucker
g
power supplying cord
2
Juice container
h
spout
i
cover
3
Body of the juice collector
4
Strainer
5
Lid
6
Clamps
7
Pusher
8
Pulp container
Preparation of the juice extractor for
operation (disassembling) (Fig. B)
Before using the juice extractor for the rst time, disassemble
it and wash parts in contact with the processed product.
1
Place the juice extractor near the socket on the rm,
clean and dry surface.
2
Pull down the clamps (6) so that the tracks moved out of
grooves of the lid (5).
3
Take the pusher (7) and the lid (5) out.
4
Then remove the juice collector (2) including the body
(3) and the lter (4). To this end, turn the body (3) right
(clockwise) to the limit and raise the body with the juice
collector and the lter.
5
Finally, disassemble the juice collector (2) from the body (3).
Wash the disassembled parts (except the motor unit)
carefully in hot water and wash-up liquid. You can also
clean them in a dishwasher in max temp. 60°C (except
for the strainer and the motor unit). After drying them
carefully, start assembling the clean parts.
Preparation of the juice extractor for
operation (assembling) (Fig. C)
1
Put the body of the juice collector (3) on the motor unit
so that a clamp (6) is placed slightly on the left of the buttons
on the motor and turn left to the limit (anticlockwise) so that
a clamp is placed over the buttons.
2
Put the juice container (2) on the body (3) so that the lip
(h) was placed in the cutting of the body (3).
3
Put the lter (4) inside, press it slightly and check if it is
well mounted and rotates easily.
4
Put the lid (5) and close the clamps (6).
INFORMATION ON FRUIT AND VEGETABLES
Fruit/vegetables Centrifuging speed Fruit/vegetables Centrifuging speed
Pineapples II Carrots II
Blueberries I Melons I
Peaches I Apricots I
Beetroots I Nectarines I
Pears I Cucumbers I
Apples I Kiwi I
Cabbage II Tomatoes I
Fennel I Celery II
Raspberries I Grapes I
64

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Zelmer 477 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Zelmer 477 in de taal/talen: Engels, Pools als bijlage per email.

De handleiding is 2,51 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info