540085
47
Verklein
Vergroot
Pagina terug
1/50
Pagina verder
49
476-013_v01
Part names (Fig. A)
1
Juice extractor motor
a
I-0-II switch
b
TURBO button
c
skimmer
d
vacuum cup
e
supply cord
2
Bowl
f
juice spout
3
Bowl insert
g
n
4
Filter
5
Lid
6
Locking bar
7
Bowl for small fruits
8
Pusher
9
Juice collector
10
Foam separator
11
Lid of collector
12
Pulp collector
13
Brush
14
Gasket
Preparations for operation
(disassembling) (Fig. B)
Disassemble the juice extractor before rst
usage and clean the parts in contact with
processed product.
1
Place the juice extractor near the socket on the rm,
clean and dry surface.
2
Pull down the locking bar (6) so that the tracks moved
out of grooves of the lid (5) from position 1 to position 2.
3
Take the pusher (8) out and remove the bowl (7) and
lid (5).
4
Then remove the bowl (2) including the insert (3) and
lter (4).
5
Then, disassemble the insert (3) from the bowl (2).
6
Finally, remove the gasket (14) from the bowl (2),
as washing the bowl (2) with the gasket (14) on is not
recommended, but only after disassembling it.
Wash the disassembled parts (apart from the
motor) carefully in hot water and wash-up
liquid. You can clean them in dishwasher in
max temp. 60ºC (apart from the motor and
lter). After drying carefully start assembling
the clean parts.
Preparations for operation
(assembling) (Fig. C)
1
Assemble the gasket (14) into the bowl (2) making sure
that the at surface of the gasket (14) is facing the top.
2
Align the bowl (2) with the gasket (14) to the motor (1),
so that the juice spout (f) was placed exactly in the casing
(1) groove and 4 buckles from the upper part of the motor
(1) were placed inside the 4 grooves in the bottom of the
bowl (2).
3
Align the insert (3) to the bowl (2) so that the n (g) of the
insert (3) is placed in the cutting of the bowl (2) over the juice
spout.
4
Put the lter (4) inside and check if it is well mounted and
rotates easily.
5
Put the lid (5) so that the n (g) of the insert (3) was
placed in the cutting of the lid (5).
6
We call your attention to proper assembling. The n (g)
of the insert (3) should be in the same line as the cutting on
the bowl (2) and the cutting in the lid (5).
7
Pull the locking bar (6) up, so that the rolls moved into
grooves of the lid (5) from position 2 to position 1 (you will
hear a characteristic clicking sound).
8
Each time insert a bowl for small fruit (7) on the feeder
opening of the cover (5).
9
Put the pusher (8) into the chute so that the V-shaped
hole was put on the knife inside the chute.
10
Put the pulp collector (12) under the lid (5) in the following
way: lean the collector and place it under the insert (3) and
lid (5), then push it towards the motor (1).
11
Put the juice collector (9) so that the juice spout (f) was
inside the collector (9).
Start-up and operation (Fig. D)
Check if the switch is turned to
„0” position.
1
Plug the juice extractor in and start it up with the switch
(a) setting as necessary gear 1 (position I low rotation) or
gear 2 (position II – high rotation).
Such exemplar table including exact
information on selection of appropriate gear for
particular fruit and vegetables is on page 48.
2
Put some fruit or vegetables into chute and press them
slightly with the pusher.
You mustn’t push the products with your
ngers or other objects.
In case of the necessity (In case of excessive accumulation of
the pulp on the lter, which causes juice extractor vibrations)
you can use TURBO button (b). The engine operates in such
case on maximal rotation for approximately 2 seconds. After
this time, the TURBO function switches off automatically,
and the engine returns to previous rotation.
47

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Zelmer 476 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Zelmer 476 in de taal/talen: Engels, Pools als bijlage per email.

De handleiding is 1,82 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info