538919
54
Verklein
Vergroot
Pagina terug
1/56
Pagina verder
54
WATER CONTAINER PROTECTION
This appliance is equipped with an internal water contain-
er (D) which is fastened with a band to protect the water
lever switch during transportation. Before the initial use,
remove the water container from the appliance and re-
move the band (see picture below). Gently replace the
water container back to its original position. Do not press
the water container, it may cause the failure of the appli-
ance.
When the water in the water container reaches a prede-
termined level, the display will show “P1: and the water
full indicator will start to ash (red). Gently remove the
water container and dispose of the water (see picture
below). Replace the water container back to its original
position. The red light will stop ashing and the “P1” sym-
bol will disappear. The appliance will continue to operate
properly.
Note: Remove the water container slowly to prevent water from splashing. The water full indicator will begin to ash and the display
will show the symbol “P1” when the water container is removed / displaced or when the predetermined water level is reached.
CLEANING AND MAINTENANCE
1. Unplug the appliance before cleaning.
2. Do not use abrasive detergents such as emulsions, cream cleaners, polishes, etc. to
clean the housing. They may remove the graphic information symbols.
3. Wipe the housing with a damp cloth. Do not wash the appliance directly under a tap or
using a water hose. Electric shock risk.
4. If the air lter is blocked with a large amount of dust, the air ow volume will be re-
duced. Clean the air lter every two weeks.
Opening and cleaning the air lter
1. Remove the lter cover and take out the air lter.
2. Wash the air lter by immersing it gently in warm water (about 40°C) with a neutral de-
tergent. Rinse the lter and dry in a shady place.
3. Attach the lter to the lter cover using the attachment hooks on the inner surface of the
cover.
4. Put the ler cover back to the appliance.
Power cord and plug
Pull the projection to open the power cord compartment.
Keep the power cord and plug clean. Roll up the power cord and store it in the power com-
partment if the appliance is not used for a long time.
BEFORE THE START OF THE SEASON
1. Check if the air inlets and outlets are not blocked.
2. Make sure the air lter is properly installed before operating the air conditioner. If the
air lter removed, dust and foreign objects may result in faulty performance of the appli-
ance.
BEFORE THE END OF THE SEASON
1. Switch off and unplug the air conditioner.
2. Clean the air lter and other parts.
3. Remove the water container. Beside the continuous drain hose you will nd a section of
hose that is plugged at the end. Remove the plug from the hose. Water from the bottom
tray will be removed through the drain hose.
4. Cover the appliance to protect it from dust and dirt.
Band
Remove
the drain plug
Hose
Band
Power cord
compartment
54

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Zelmer 23Z010 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Zelmer 23Z010 in de taal/talen: Engels, Pools als bijlage per email.

De handleiding is 1,74 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info