674740
113
Verklein
Vergroot
Pagina terug
1/154
Pagina verder
Page 111FT-991 OperaTing Manual
usinG the Gps function
Positioning Using an External GPS Device
A YAESU
FT1DR/DE
,
FTM-400DR/DE
or a commercially available GPS receiver/antenna may be connected to the
GPS/CAT
jack on the rear panel.
The
GPS/CAT
jack connector is illustrated below.
connecting to the Ft1dr/de
connecting to the FtM-400dr/de
1. Press the front panel
ON/OFF
switch to turn the
transceiver off.
2. Plug the connector of the external device into the
GPS/CAT
jack on the rear panel.
3. Press and hold in the front panel
ON/OFF
switch to
turn the transceiver on.
4. Press the
MENU(SETUP)
button to enter the Menu
mode.
5. Rotate the
MULTI
knob to select Menu item
028
GPS/232C SELECT
”.
6. Touch
[
SELECT
] on the LCD, then rotate the
MULTI
knob to set this Menu item to
GPS1
” or
GPS2
” (the default setting is “
GPS1
”).
GPS1
: Enables connection to an external GPS de-
vice.
GPS2
: Enables connection to an external GPS de-
vice, and displays the location information in
real time.
7. Touch
[
ENTER
]
on the LCD to save the new set-
ting.
8. Press the
MENU(SETUP)
button or touch
[
BACK
]
on the LCD to exit to normal operation.
When the external device acquires three or more
satellites, the “ icon will be displayed on the top
right of the screen.
GPS/CAT Jack
ON/OFF Switch MENU(SETUP
)
Button
MULTI Knob
Advice:
When connecting to an external GPS device, refer
to the operating manual of the connected device as
well.
When using an external GPS device, separate the
FT-991
transceiver away from the external GPS de-
vice to reduce the possibility of RF interference.
poSitioning uSing gpS
TXD (Serial data output) (FT1DR/DE FT-991)
RXD (Serial data input) (FT1DR/DE FT-991)
GND
GPS/CAT Jack
(CT-169 Option)
FT1DR/DE
TXD (Serial data output)
(FTM-400DR/DE FT-991)
RXD (Serial data input)
(FTM-400DR/DE FT-991)
GND
GND (Heavy black line)
TXD (Blue)
RXD (Gray)
GPS/CAT Jack
(CT-167 Option)
FTM-400DR/DE
TXD (Serial data output) (FTM-400DR/DE FT-991)
RXD (Serial data input)(FTM-400DR/DE FT-991)
GND
GPS/CAT Jack
(CT-165 Option)
FTM-400DR/DE
113

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Yaesu FT-991 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Yaesu FT-991 in de taal/talen: Engels als bijlage per email.

De handleiding is 30,58 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info