674740
80
Verklein
Vergroot
Pagina terug
1/154
Pagina verder
Page 78
FT-991 OperaTing Manual
cw MoDe operation
uSing the built-in electronic keyer
Connect the cable from your keyer paddle to the front panel
KEY
jack.
1. Press the
MODE
button, then touch
[
CW-LSB
]
or
[
CW-USB
]
on the TFT LCD display. The “
C-L
or “
C-U
icon will appear in the display. The CW
monitor is activated.
MULTI Knob
MODE Button
F(M-LIST) Button
2. Rotate the Main Tuning Dial knob to select the de-
sired operating frequency.
3. Press the
F(M-LIST)
button, then touch
[
KEYER
]
on the LCD to select “
ON
to conrm that the built-
in Electronic Keyer is now active.
4. Touch
[
SPEED
]
on the LCD, then rotate the
MULTI
knob to set the desired sending speed (4 - 60 WPM).
Advice:
Rotate the
MULTI
knob to display the keying
speed (4 - 60 WPM) below the
[
SPEED
]
indica-
tor.
By pressing either the “Dot” or “Dash” side of
the paddle, the CW keying tone will automati-
cally be generated.
5. Touch
[
BK-IN
]
on the TFT display to engage auto-
matic activation of the transmitter when either the
“Dot” or “Dash” side of the paddle is pressed. The
Break-in will be set to “
ON
”.
6. CW operation utilizing the CW paddle may now
commence.
Advice:
When the keyer paddle is pressed, the transmitter
will automatically be activated, and the CW charac-
ters (or a string of dots or dashes) will be transmit-
ted. When the keyer paddle is released, transmission
will cease, and after a brief delay, reception will be
restored. The delay time is user-programmable, per
the discussion on page 83.
The CW sidetone audio level may be set using
“MONITOR” (see page 72).
If [
BK-IN
] is set to “
OFF
”, you may practice sending
CW with the sidetone only, without having the signal
go out over the air. (Press the front panel
F(M-LIST)
button to reveal the functions list on the TFT display ).
If the transmitter power is reduced via [
RF PWR
]
function, the ALC meter reading will increase; this
is normal and does not indicate any problem whatso-
ever (because increased ALC voltage is being used
to lower the power).
The keying operation may also be enabled in LSB/
USB mode to send the CW signal via the Menu item
055 CW AUTO MODE
” without switching to CW
mode.
The same frequency may be displayed when switch-
ing between SSB mode and CW mode by setting
Menu item “
059 CW FREQ DISPLAY
”.
By connecting a computer, CW can be operated us-
ing free or commercially available software and set-
ting Menu item “
060 PC KEYING
”.
The electronic keyer operation mode can be changed
via the Menu item “
012 KEYER TYPE
”.
80

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Yaesu FT-991 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Yaesu FT-991 in de taal/talen: Engels als bijlage per email.

De handleiding is 30,58 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info