478500
60
Verklein
Vergroot
Pagina terug
1/76
Pagina verder
Page 58 FT-897D OPERATING MANUAL
MENU MODE No-030
[
CW SPEED
]
Function: Sets the sending speed for the built-in Electronic
keyer.
Available Values: 4wpm ~ 60 wpm (1wpm/step)/20cpm ~
300 cpm (5cpm/step)
Default: 12 wpm (60 cpm)
You can set the sending speed according to either of two
units of speed (wpm: words per minute; cpm: characters
per minute)
To switch units between “wpm” and “cpm,” just press the
MEM/VFO CH knob.
MENU MODE No031
[
CW TRAINING
]
Function: Sends random Morse Code five-character groups
via the sidetone.
Available Values: N / A / AN
Default: N
N: Numeric characters only
A: Alphabet characters only
AN: Numeric and Alphabet characters (Mixed)
MENU MODE No032
[
CW WEIGHT
]
Function: Sets the Dot:Dash ratio for the built-in electronic
keyer.
Available Values: 1:2.5 ~ 1:4.5
Default: 1:3.0
MENU MODE No-033
[
DCS CODE
]
Function: Setting of the DCS code.
Available Values: 104 Standard DCS codes
Default: 023
You can set the DSC codes for Encode and Decode sepa-
rately.
To switch between “ENCODE” and “DECODE,” just press
the MEM/VFO CH knob.
MENU MODE No034
[
DCS INV
]
Function: Selects “Normal” or “Inverted” DCS coding.
Available Values: Tn-Rn/Tn-Riv/Tiv-Rn/Tiv-Riv
Default: Tn-Rn
“n” = “normal”
“iv” = “inverted”
MENU MODE No-035
[
DIAL STEP
]
Function: Setting of the DIAL knob’s tuning speed.
Available Values: FINE/COARSE
Default: FINE
You may choose between two speeds for the DIAL knob.
Selecting “COARSE” doubles the tuning rate compared to
the default value.
FINE: 10 Hz/step @SSB/CW mode, 100 Hz/step @AM/
FM
COARSE: 20 Hz/step @SSB/CW mode, 200 Hz/step @AM/
FM
MENU MODE No036
[
DIG DISP
]
Function: Defines the displayed frequency offset during
DIG (USER-L or USER-U) mode operation.
Available Values: –3000 ~ +3000 Hz
Default: 0 Hz
MENU MODE No037
[
DIG GAIN
]
Function: Adjusts the audio input level from terminal equip-
ment (such as a TNC or PSK-31 sound card) during DIG
(Digital) mode operation.
Available Values: 0 ~ 100
Default: 50
MENU MODE No038
[
DIG MODE
]
Function: Selects the mode and sideband (if applicable) in
the DIG (Digital) mode.
Available Values: RTTY-L/RTTY-U/PSK31-L/PSK31-U/
USER-L/USER-U
Default: RTTY-L
RTTY-L: AFSK RTTY operation on the LSB mode
RTTY-U: AFSK RTTY operation on the USB mode
PSK31-L: PSK-31 operation on the LSB mode
PSK31-U: PSK-31 operation on the USB mode
USER-L: User-programmed costume operation based on
LSB mode
USER-U: User-programmed costume operation based on
USB mode
In the USER-L and USER-U modes, you can
define the display frequency offset and carrier
frequency offset by Menu Mode No-036 [DIG
DISP] and No-039 [DIG SHIFT].
MENU MODE No039
[
DIG SHIFT
]
Function: Defines the carrier frequency offset during DIG
(USER-L or USER-U) mode operation.
Available Values: –3000 ~ +3000 Hz
Default: 0 Hz
MENU MODE No040
[
DIG VOX
]
Function: Sets the gain of the VOX circuitry’s input level
for the DIG mode.
Available Values: 0 ~ 100
Default: 0
Note: When you wish to use “DIG VOX,” press the [F] key
momentarily, then rotate the MEM/VFO CH knob, until you
reach Multi Function Row “d” [RPT, REV, VOX], then press
the [C](VOX) key. The parentheses and icon will dis-
appear, signifying that the (SSB/AM/FM voice) VOX sys-
tem has been turned off. Despite these indicators having
disappeared, the Digital Mode “VOX” system will still be
active, allowing audio input from a TNC or sound card to
engage the transmitter.
MENU MODE No-041
[
DISP COLOR
]
Function: Selects the illumination color for each operating
status.
Available Values: ARTS/BAND/FIX/MEMGRP/MODE/
MTR/VFO
Default: FIX
MENU MODE No-042
[
DISP CONTRAST
]
Function: Setting of the display contrast level.
Available Values: 1 ~ 13
Default: 5
MENU OPERATION
60

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Yaesu FT-897D bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Yaesu FT-897D in de taal/talen: Engels als bijlage per email.

De handleiding is 3,3 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info