478499
69
Verklein
Vergroot
Pagina terug
1/132
Pagina verder
67FT-857D Operating Manual
TRANSMITTER OPERATION
TIME-OUT TIMER
Most often used on FM, the transmitters Time-Out Timer (TOT) feature disables the trans-
mitter after a user-defined period of transmission. This feature may be useful in preventing
a “stuck microphone” (accidental closure of the PTT switch) from causing interference to
other users, and it will also force you to keep your transmissions short, thereby conserving
battery power.
To activate the Time-Out Timer:
1. Press and hold in the
[
FUNC
]
key for one second to enter the Menu mode.
2. Rotate the SELECT knob to recall Menu Mode No-084
[
TOT TIME
]
.
3. The default setting for this feature is “OFF.” Rotate the DIAL knob to set a new time-out
setting (from 1 minute to 20 minutes).
4. When you have made your selection, press and hold in the
[
FUNC
]
key for one second
to save the new setting and exit to normal operation.
SPLIT FREQUENCY OPERATION
This transceiver provides convenient split-frequency operation, using VFO-A and VFO-B,
for DX working and other operating situations requiring unique split frequency pairs.
The example below will describe a typical split-frequency DX situation on the 20-meter
band, with a DX station transmitting on 14.025 MHz, listening 10 kHz higher in the band.
1. Set VFO-A to 14.035.00 MHz CW (DX station’s listening frequency).
2. Press the
[
FUNC
]
key momentarily, then rotate the SELECT knob, as needed, until
Multi Function Row “a” [A/B, A=B, SPL] appears on the display.
3. Press the
[
B
](
A=B
)
key momentarily (to set VFOs A and B to 14.035.00 MHz).
4. Press the
[
A
](
A/B
)
key momentarily to select VFO-B, then tune the VFO-B frequency
to 14.025.00 MHz (DX station’s transmitting frequency).
5. Press the
[
C
](
SPL
)
key momentarily. The transceiver will now transmit using the VFO-
A frequency, and will receive using the VFO-B frequency.
The “” icon will appear at the left side of the “SPL” indication, and the “SPL” icon
will appear at the upper left corner of the display.
6. To listen to the pile-up calling the DX station (so as to align your frequency more closely
to that of the station being worked by the DX), press the
[
A
](
A/B
)
key to reverse the
VFOs. You will now be tuning in the vicinity of 14.035 MHz, and you can zero in on the
DX station’s listening frequency by tuning in on the station in QSO with the DX. Press
the
[
A
](
A/B
)
key again to return to reception on the DX station’s frequency.
7. Press the
[
C
](
SPL
)
key once more to cancel split operation; the “” icon and “SPL
icon will disappear from the display.
69

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Yaesu-FT-857D

Zoeken resetten

  • Hoe komt het dat ik de 2 mtr repaeter niet open krijg , ,terwijl alle settings goed staan ??
    Ik bezit de Yaesy FT857D , ,de 70 cm repeater ,werkt vrijwel meteen ,
    Maar de 2 mtr ,helaas niet ondanks 885 tone en - 0,6 Mhz voor de split !!
    Vriendelijk dank ,
    C.J.Klunder
    PD7BRW c.klunder@chello.nl Gesteld op 11-6-2023 om 14:49

    Reageer op deze vraag Misbruik melden
  • ik zoek de instelling van het menu van de FT857D om ham radio deluxe te kunnen installeren Openen ik ben na een update alles kwijt geraakt en krijg het niet weer geinstalleerd geopend
    ik heb de laatste betaalde versie, email graag met nummers van het menu naar
    PA3DFV@gmail .com Gesteld op 8-8-2022 om 15:56

    Reageer op deze vraag Misbruik melden
  • Als ik ga zenden in cw dan heb ik geen output. de andere mode's wel. Yaesu 857d. pa3dmx@veron.nl Gesteld op 28-11-2020 om 14:03

    Reageer op deze vraag Misbruik melden

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Yaesu FT-857D bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Yaesu FT-857D in de taal/talen: Engels als bijlage per email.

De handleiding is 4,64 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info