478466
46
Verklein
Vergroot
Pagina terug
1/84
Pagina verder
44 FT-7900R OPERATING MANUAL
MEMORY SCANNING
Memory scanning is similarly easy to initiate:
1. Set the radio to the Memory mode by pressing the
[
V/M
(
MW
)]
key, if necessary.
2. Press the
[
SCAN
(
SEL
)]
key to initiate scanning.
3. As with VFO scanning, the scanner will halt on any signal encountered that is strong
enough to open the squelch; it will then resume scanning according to the Scan-Resume
mode set previously.
4. To cancel scanning, press the
[
SCAN
(
SEL
)]
key again (or press the microphone’s PTT
key).
You may initiate the memory channel scan by pressing and holding in the
microphone’s [UP] or [DWN] key.
How to Skip (Omit) a Channel During Memory Scan Operation
Some continuous-carrier stations like a Weather Broadcast station will seriously impede
scanner operation if you are using the “Carrier Drop” Scan-Resume mode, as the incoming
signal will not pause long enough for the transceiver to resume scanning. Such channels may
be “Skipped” during scanning, if you like:
1. Set the radio to the Memory Mode by pressing the
[
V/M
(
MW
)]
key, if necessary.
2. Rotate the DIAL knob to select the Memory Channel to be skipped during scanning.
3. Press and hold in the
[
BAND
(
SET
)]
key for 1/2 second to enter the Set mode.
4. Rotate the DIAL knob to select Menu #40 (
SKIPSKIP
SKIPSKIP
SKIP).
5. Press the
[
BAND
(
SET
)]
key momentarily, then rotate
the DIAL knob to “
SKIPSKIP
SKIPSKIP
SKIP”. The current Memory Chan-
nel will now be ignored during scanning. The small
SKIPSKIP
SKIPSKIP
SKIP” icon will also appear when you recall the
“Skipped” memory channel manually. The “
ONLYONLY
ONLYONLY
ONLY” se-
lection is used for “Preferential Memory Scan”, described in the next column.
6. Press the
[
BAND
(
SET
)]
key momentarily to save the new setting, then press and hold in
the
[
BAND
(
SET
)]
key for 1/2 second to exit to normal operation.
7. To re-institute a channel into the scanning loop, select “
OFFOFF
OFFOFF
OFF” in step 5 above (the “Skipped”
channel will still be accessible via manual channel selection methods using the DIAL
knob in the MR mode, whether or not it is locked out of the scanning loop).
SCANNING
46

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Yaesu FT-7900R bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Yaesu FT-7900R in de taal/talen: Engels als bijlage per email.

De handleiding is 2,87 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info