478472
26
Verklein
Vergroot
Pagina terug
1/44
Pagina verder
FT-250R OPERATING MANUAL22
MEMORY SCANNING
Memory scanning is similarly easy to initiate:
c
Set the radio to the Memory mode by pressing the
[
MR/MW
(
SKIP
)
]
key, if necessary.
d
Press and hold in the
[
(
MHz
)
]
/
[
(
MHz
)
]
key for 1/2 second to initiate scanning.
e
As with VFO scanning, the scanner will halt on any signal encountered that is strong
enough to open the squelch; it will then resume scanning according to the Scan-Re-
sume mode set previously.
f
To cancel scanning, press the PTT key.
H
OW
TO
S
KIP
(
O
MIT
)
A
C
HANNEL
D
URING
M
EMORY
S
CAN
O
PERATION
When you have some very active channels stored in memories, you may wish to skip them
when scanning, but still have them available for manual selection.
Such channels may be “Skipped” during scanning, if you like:
c
Set the radio to the Memory Mode by pressing the
[
MR/MW
(
SKIP
)
]
key, if necessary.
d
Rotate the DIAL to select the Memory Channel to be skipped during scanning.
e
Press the
[
F/L
]
key momentarily (not for 1/2 second), then press the
[
MR/MW
(
SKIP
)
]
key (momentarily). A small “SKIP” will appear to the LCD. indicating it is to be
ignored during scanning.
To re-institute the channel into the scanning loop, repeat the above three steps (the “Skipped”
channel will, of course, still be accessible via manual channel selection methods using the
DIAL in the MR mode).
PROGRAMMABLE
(
BAND LIMIT
)
M
EMORY SCAN
(
PMS
)
This feature allows you to set sub-band limits for either scanning or manual VFO opera-
tion. For example, you might wish to set up a limit (in North America) of 144.300 MHz to
148.000 MHz so as to prevent encroachment into the SSB/CW “Weak Signal” portion of
the band below 144.300 MHz. Here’s how to do this:
c
Set the radio to the VFO mode by pressing the
[
VFO
(
PRI
)
]
key, if necessary.
d
Using the techniques learned earlier, store (per the above example) 144.300 MHz into
Memory Channel #
L1L1
L1L1
L1 (the “
LL
LL
L” designates the Lower sub-band limit).
e
Likewise, store 148.000 MHz into Memory Channel #
U1U1
U1U1
U1 (the “
UU
UU
U” designates the Up-
per sub-band limit).
f
Switch to the Memory mode by pressing the
[
MR/MW
(
SKIP
)
]
key once, then rotate
the DIAL to select Memory Channel #
L1L1
L1L1
L1.
g
Press the
[
MR/MW
(
SKIP
)
]
key; the “
MRMR
MRMR
MR” label will be blinking in the left-hand fre-
quency of the display.
h
You may now rotate the DIAL, or begin scanning by pressing the
[
(
MHz
)
]
or
[
(
MHz
)
]
key for 1/2 second. The transceiver will behave as though it is in the standard VFO
mode, but operation will be restricted to the range between Memory Channels
L1L1
L1L1
L1 and
U1U1
U1U1
U1.
Note: Five pairs of Band Limit memories, labeled
L1L1
L1L1
L1/
U1U1
U1U1
U1 through
L5L5
L5L5
L5/
U5U5
U5U5
U5 are available.
Scanning
26

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Yaesu FT-250R bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Yaesu FT-250R in de taal/talen: Engels als bijlage per email.

De handleiding is 1,96 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info