478472
24
Verklein
Vergroot
Pagina terug
1/44
Pagina verder
FT-250R OPERATING MANUAL20
desired label. A total of seven characters may be used in the creation of a label.
j
When you have programmed a label which is under 7 characters, press and hold in the
[
F/L
]
key for one second to confirm the label (if the label is exactly 7 characters in
length, you do not need to press and hold in
[
F/L
]
key).
k
When you have completed the creation of the label, press the PTT to save the label and
exit to normal operation.
To activate Alphanumeric Tags:
c
Press the
[
F/L
]
key, then press the
[
6
(
A/N
)
]
key.
d
Rotate the DIAL and select “
ALPHAALPHA
ALPHAALPHA
ALPHA”.
e
When you have made your selection, press the PTT key to save the new setting and
exit to normal operation.
f
To display the frequency again, select “
FREQFREQ
FREQFREQ
FREQ” in step
d
above.
MASKING MEMORIES
There may be situations where you want to “Mask” memories so they are not visible
during memory selection or scanning. For example, several memories used only in a city
you visit infrequently may be stored, then “Masked” until you visit that city, at which time
you can “Unmask” them for normal use.
c
Press the
[
MR/MW
(
SKIP
)
]
key, if needed, to enter the MR mode.
d
Press and hold in the
[
MR/MW
(
SKIP
)
]
key for 1/2 second, then rotate the DIAL to
select the memory channel to be “Masked” from view.
e
Press the
[
F/L
]
key. The display will revert to memory channel #1. If you rotate the
DIAL to the location you just “Masked,” you will observe that it is now invisible.
f
To Unmask the hidden memory, repeat the above procedure: press and hold in the
[
MR/MW
(
SKIP
)
]
key for 1/2 second, rotate the DIAL to select the masked memory’s
number, then press
[
F/L
]
to restore the memory channel’s data.
MEMORY ONLY MODE
This allows operation only on stored memories, which are displayed by name (if any) at
the right, and the memory channel number to the left. No frequency is displayed, and only
CH.CH.
CH.CH.
CH.
nnnn
nnnn
nn
” will appear if you haven’t assigned an Alphanumeric name to a memory.
Repeater shift and tone setting indicators are displayed in the Memory Only mode, al-
though they cannot be changed.
Here is the procedure for activating the Memory Only mode:
c
Turn the radio off.
d
Press and hold the PTT and LAMP key while turning the radio on.
e
Rotate the DIAL to select “
MEM.ONLYMEM.ONLY
MEM.ONLYMEM.ONLY
MEM.ONLY”.
f
Press the
[
F/L
]
key momentarily to initialize the radio.
g
Repeat the previous step to return to normal operation.
Memory Operation
24

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Yaesu FT-250R bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Yaesu FT-250R in de taal/talen: Engels als bijlage per email.

De handleiding is 1,96 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info