478472
13
Verklein
Vergroot
Pagina terug
1/44
Pagina verder
FT-250R OPERATING MANUAL 9
Setting repeater Tx Offset
Although you should keep the repeater offset programmed to that used in your area, you
can change the default repeater offset for special applications:
c
Press the
[
F/L
]
key, then immediately press the
[
0
(
SET
)
]
key to enter the Set mode.
d
Rotate the DIAL to select Menu Item #4 (“
SHIFTSHIFT
SHIFTSHIFT
SHIFT”).
e
Press the
[
F/L
]
key to enable modification of the current setting.
f
Rotate the DIAL to select the new shift offset frequency (selectable in 50-kHz incre-
ments only).
g
Press the PTT key to save the new setting and exit to normal operation.
Checking the Repeater Uplink (Input) Frequency
It often is helpful to be able to check the uplink (input) frequency of a repeater, to see if the
calling station is within direct (“Simplex”) range.
To do this, just press the
[
REV
(
HM
)
]
key momentarily. If Menu Item #20 (“
REVREV
REVREV
REV/
HMHM
HMHM
HM”)
has been set to “
HMHM
HMHM
HM,” you may press the
[
F/L
]
key, and then
[
REV
(
HM
)
]
key. To return to
the normal uplink/downlink frequency relationship, repeat this step.
KEYBOARD LOCKING
To activate the locking feature, press and hold in the
[
F/L
]
key for one second. The “
icon will appear on the LCD. To cancel locking press and hold in the
[
F/L
]
key again for
one second.
In order to prevent accidental frequency change or inadvertent transmission, various as-
pects of the FT-250Rs DIAL, keypad and switches may be locked out. You may change
the lockout combinations.
To lock out some or all of the keys:
c
Press the
[
F/L
]
key, then press the
[
0
(
SET
)
]
key to enter the Set mode.
d
Rotate the DIAL to select Menu Item #32 (“
LK MODELK MODE
LK MODELK MODE
LK MODE”).
e
Press the
[
F/L
]
key to enable setting of the Lock mode (which defines which keys/
functions are to be locked out).
f
Rotate the DIAL to the desired locking scheme as listed below:
KEYKEY
KEYKEY
KEY: Just the front panel keys are locked out
DIALDIAL
DIALDIAL
DIAL: Just the top panel DIAL is locked out
KK
KK
K +
D D
D D
D (
KEYKEY
KEYKEY
KEY +
DIALDIAL
DIALDIAL
DIAL) : Both the DIAL and Keys are locked out
PTTPTT
PTTPTT
PTT: The PTT switch is locked (TX not possible)
KK
KK
K +
P P
P P
P (
KEYKEY
KEYKEY
KEY +
PTTPTT
PTTPTT
PTT) : Both the keys and PTT switch are locked out
DD
DD
D +
P P
P P
P (
DIALDIAL
DIALDIAL
DIAL +
PTTPTT
PTTPTT
PTT) : Both the DIAL and PTT switch are locked out
ALLALL
ALLALL
ALL: All of the above are locked out
g
When you have made your selection, press the PTT key momentarily to save the new
setting and resume normal operation.
Basic Operation
13

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Yaesu FT-250R bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Yaesu FT-250R in de taal/talen: Engels als bijlage per email.

De handleiding is 1,96 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info