730175
11
Verklein
Vergroot
Pagina terug
1/13
Pagina verder
Troubleshooting
If a malfunction occurs during a cleaning, the ring-shaped indicator of the device starts to
ash rapidly in red and the voice message will turn on.
Recommendations
Error 1: Slightly turn the laser (orange) rangender, to ensure unobstruction of its motion.
The normal operation of the laser distance sensor is prevented by other foreign objects.
Please wipe the sensors, remove excess items; If you do not have the opportunity to
remove excess items, move the vacuum cleaner to another location.
Error 2: Wipe and lightly press the collision sensor.
In the event of a malfunction of the collision sensor, repeatedly press it to remove all
foreign objects; If there are no foreign objects, move the vacuum cleaner to another place.
Error 3: Move the vacuum cleaner to a dierent location.
The wheel is in a suspended state, move the vacuum cleaner to another location.
Error 4: Wipe the fall sensor and move the vacuum cleaner away from the edge
(for example, from a step).
The fall sensor does not identify underneath the supports, move the vacuum cleaner to
another place; The sensor of the fall is too dirty, so problems can occur. Please clean the
dip sensor.
Error 5: Pull out the main brush. It is necessary to clean the brush and x of the main axis
of the brush.
Foreign objects can be wound around the main brush, it is necessary to clean the brush
and x the main axis of the brush.
Error 6: Pull and clean side brushes.
Foreign objects can be wound around the side brush; it is necessary to clean the brush.
Error 7: Make sure that no foreign objects have entered the main wheel and move the
device to a new location.
Foreign objects can be wound around the wheel; remove and clean the wheel.
Error 8: Provide enough space around the vacuum cleaner.
It is possible to entangle the vacuum cleaner or it can get stuck between other objects,
please provide enough space around the vacuum cleaner.
Error 9: Install the dust bag and lter.
Install the dust bag and lter, and make sure they are installed correctly; If the device
continues to show an error, try replacing the lter; After rinsing the lter, leave it to dry for
24 hours.
Error 10: Make sure the lter is dry or rinse the lter.
It is possible to get foreign objects in the lter, make sure it is clean; if the problem
persists, replace the lter.
Error 11: A strong magnetic eld is detected, move the vacuum cleaner away from the
special tape (virtual wall).
The vacuum cleaner is too close to the special tape (virtual wall), please move the device
to a dierent location.
Error 12: Charge level is too low, charge the device.
Charge level is too low, charge the device.
Error 13: The problems with charging, make sure the contact between a vacuum cleaner
and a docking station.
Using a dry cloth, wipe the contact areas of the device and the docking station.
Error 14: Problems with charging.
The battery temperature is too high or too low. Wait until the battery temperature is normal.
Error 15: Wipe the distance to the wall sensor.
A sensor for determining the distance to the wall can settle a lot of dust, carefully wipe it.
Error 16: Install the vacuum cleaner on a at surface and turn on the device.
The device is on an uneven surface, move the vacuum cleaner to a at surface and restart
the computer.
Error 17: Problems with the operation of the side brushes, please reset the system
settings.
Occurrence of problems with the operation of the side brushes, perform a system reset.
Error 18: Problems with the operation of the suction fan, reset the system.
If there are problems with the operation of the suction fan, reset the system.
Troubleshooting
11

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Xiaomi Roborock Robot Vacuum Cleaner bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Xiaomi Roborock Robot Vacuum Cleaner in de taal/talen: Engels als bijlage per email.

De handleiding is 1,31 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info