450668
5
Verklein
Vergroot
Pagina terug
1/8
Pagina verder
14
To ensure the dishwasher works at its best, soft
water, i.e. water that is lime-free, is required. The
presence of lime in tap water causes water stains
due to calcium deposits on crockery and glasses.
A water softening system has been built in the
dishwasher to ensure a steady supply of soft
water. This is basically a decalcifying system,
which needs to be regenerated regularly using
special dishwasher salt.
Setting the correct water hardness level:
Set the water hardness level by turning the
selector fitted on the left-hand side of the inner
appliance wall by using a coin. Use the table
below to set the dial to the correct setting:
If the water hardness level falls within category 1
(soft), no salt is required.
To find out the waterhardness level of water in
your area contact your local Water Board or
check the last bill you received.
If provided, a simple test can be employed to set
the hardness level using the hardness test strip.
Dip the test strip into a glass of water from the
tap.
Wait for 3 seconds, withdraw the strip from
the water.
Wait for 1 minute.
If all the three test squares are still green, set
the hardness selector to 0, and disregard all
instructions about salt usage.
If one of the test squares becomes red, set
the selector to 1.
If two of the test squares become red, set the
selector to 2.
If all of the test squares become red, set the
hardness selector to 3.
How to fill the salt container:
Warning: only use dishwasher salt!
Do not fill the salt container with
unsuitable substances, such as
detergent, as this will cause irreparable
damage to the water softener system.
1. Remove the lower rack.
2. Unscrew the cap by turning it counter-clockwise.
3. When first using the dishwasher: fill the salt
container with approximately 1 litre of water.
4. Fill the salt container to the rim with salt
(using the funnel provided) (when filling for
the first time use min. 1.5 kg and max. 2 kg)
and stir with a spoon handle.
5. Screw the cap back on by turning it
clockwise.
6. Fit the lower rack.
7. After filling the regeneration salt container,
immediately
start a wash programme (the
Prewash programme alone is not sufficient),
so as to eliminate any residual saline solution
straight away and avoid corrosion.
Check the salt level regularly.
Salt level indicator:
The dishwasher is equipped with an electric or
visual salt level indicator (depending on the
model installed).
Electric indicator:
The salt level indicator lamp on the control panel
lights up when the salt container is empty.
Visual indicator:
The green float is clearly visible in the cap
window when the salt container is sufficiently full.
The green float drops and is no longer visible
when the salt container needs to be refilled.
HOW TO FILL THE SALT CONTAINER
Water
hardness
category
German
degrees
°dH
French
degrees
°fH
Position
of the
selector
1 0 - 6 0 - 11 0
2 7 - 13 12 - 23 1
3 14 - 20 24 - 36 2
4 21 - 35 37 - 63 3
9LVXDOLQGLFDWRU
)XOO
(PSW\
5

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Whirlpool ADP 253 WH bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Whirlpool ADP 253 WH in de taal/talen: Engels als bijlage per email.

De handleiding is 0,28 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Whirlpool ADP 253 WH

Whirlpool ADP 253 WH Snelstart handleiding - Nederlands - 4 pagina's

Whirlpool ADP 253 WH Gebruiksaanwijzing - Nederlands - 8 pagina's

Whirlpool ADP 253 WH Gebruiksaanwijzing - Deutsch - 7 pagina's

Whirlpool ADP 253 WH Gebruiksaanwijzing - Deutsch - 8 pagina's

Whirlpool ADP 253 WH Snelstart handleiding - English - 4 pagina's

Whirlpool ADP 253 WH Snelstart handleiding - Français - 4 pagina's

Whirlpool ADP 253 WH Gebruiksaanwijzing - Français - 7 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info