523453
13
Verklein
Vergroot
Pagina terug
1/98
Pagina verder
13
en
Changing blades
1
Remove the mains plug before any maintenance and
cleaning work!
When servicing the cutting tool ensure that it can still al-
ways run on even when the motor is switched off.
For safety reasons, always have the blades changed by an
authorised service centre.
1. Unscrew the knob and fold the casing upwards to open .
2. In order to change the blades insert the hexagon spanner (1)
in the slot on the retaining plate and through the cover.
3. Loosen the two screws with the Allen spanner
(2) and take
out the worn blades.
4. Insert the new blades and tighten the screws.
1
Remove both the Allen and hexagon spanner after com-
pleting the change.
5. Close the casing again and tighten the knob .
Empty the collection container
1
Remove the mains plug before any maintenance and
cleaning work!
3
Note
The locking lever has the function of a safety switch and must
be in Position
(2) while operating the product. If the locking
lever should not be correctly snapped in, this and the switch
must be cleaned in the product, if required.
1. Bring the locking mechanism to position 1.
2. Pull the collection container completely out of the frame.
3. Empty the container.
4. Slide the collection container onto the frame as far as it will go.
5. Bring the locking mechanism to position 2.
Fixing problems
Warranty
The warranty rules issued by our company or the importer apply to every
country. As part of the warranty, we remedy malfunctions on your appli-
ance free of charge provided that this malfunction is caused by a material
or manufacturing defect. In the event of a warranty claim, please turn to
your dealer or the nearest branch office.
E
F
E
F
F
E
G
G
Problem Possible cause Solution
Motor does not start.
z
Not connected to voltage supply
z
Check protection
z
Faulty connection cable
z
Check the cable (electrical expert)
Motor hums but does not start
z
Top of casing not closed properly (safety shutdown de-
vice is tripped)
z
Close top of casing properly and screw, re-
move dirt if required.
z
Blade unit blocked
z
Switch off appliance, remove mains plug
and clean appliance on the inside
z
Faulty capacitor
z
Give appliance to authorised WOLF-Gar-
ten customer service centre for repair.
Motor does not start.
z
Extension cable too long or cross section too small
z
Extension cable min. 1.5 mm², max. 25 m
long. In the case of longer cable cross sec-
tion min. 2.5 mm
2
.
z
Socket too far from main connection and connecting
lead cross section too small
Reduced cutting output
z
Dull blade.
z
Changing blades
When in doubt, always seek out a WOLF Service location.
Attention: Put down the appliance and pull out the power plug before performing any checks or work on the blades.
13

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

WOLF-Garten-SDE-2800-EVO

Zoeken resetten

  • Ik heb het apparaat volgens de gebruiksaanwijzing in elkaar gezet en de opvangbak goed geplaatst. De stroomvoorziening heb ik na gekeken maar de hakselaar doet niks. Hij gaat niet aan, maakt ook totaal geen geluid, niks doet ie. Gesteld op 15-2-2023 om 12:45

    Reageer op deze vraag Misbruik melden

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw WOLF-Garten SDE 2800 EVO bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van WOLF-Garten SDE 2800 EVO in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Pools, Turks, Deens, Zweeds, Noors, Fins als bijlage per email.

De handleiding is 1,97 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info