457616
16
Verklein
Vergroot
Pagina terug
1/130
Pagina verder
16
G
3 Note:
Mulching is not advisable in case of moss-affected or
entangled grass, because the cut material stays on the
moss surface and/or entanglement and thus cannot be
absorbed by the ground.
z Regularly scarify and manure the lawn.
Activating the mulch function
1 Attention! Rotary cutter blade
Undertake adjustments on the equipment only after the
motor is switched off and the cutting tool has come to a
standstill.
z Do not start the motor until your feet are at a safe distan-
ce from the cutting tool.
1. Remove the grass collecting bag.
2. Set the switch to „MULCH“.
3. Start the motor.
Maintenance
General
1 Caution! Rotating blade
Before carrying out any maintenance or cleaning work:
z Remove the contact key.
z Remove the battery.
z Do not touch rotating blades.
Cleaning
z Clean mower thoroughly after each mowing with cloth or
brush.
z Never spray the mower with water.
z Clean the mulch flap at regular intervals with a small broom
(LI-ION POWER 37, LI-ION POWER 40) .
Winter Storage
z Clean mower thoroughly before storing away.
z Have your mower thoroughly checked once a year by an ap-
proved Service Centre.
z Do not store it in a wet or humid place.
z The Lithium iron battery must also be recharged before pro-
longed periods of non-use, for example at the beginning of
winter.
Blade change
1 Caution! Rotating blade
Before carrying out any maintenance or cleaning work:
z Remove the contact key.
z Remove the battery.
z Do not touch rotating blades.
z Wear protective gloves.
1 Attention!
An unbalance can develop after regrinding of the blade.
z Always regrind the blades in a specialist workshop, be-
cause an unbalance check should be undertaken accor-
ding to the safety regulations.
z Always change blades in a specialist workshop. A torque
spanner of 10 mm is mandatorily required. Fastening torque
of the screws: 6 - 7 N-m (LI-ION POWER 34, LI-ION POWER
37).
z Always change blades in a specialist workshop. A torque
spanner of 13 mm is mandatorily required. Fastening torque
of the screws: 16-18 N-m (LI-ION POWER 40).
z Use only original WOLF spare parts.
Faults and how to remedy
U
V
W
Problem Possible causes
Remedy
Jerky run, machine
heavily vibrating
Blade damaged Contact WOLF Service workshop
Blade loose See page 16 (Blade change)
Motor fails to start
Battery flat See page 14 (Charging the battery)
Battery defective See page 17 (Spare parts)
Contact key not inserted See page 14 (General)
Poor
cutting/catching
performance
Blade blunt Contact WOLF Service workshop
Bag blocked See page 15 (Emptying of Grassbox)
Incorrect cutting height See page 15 (Set cut height)
Battery defective See page 17 (Spare parts)
16

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw WOLF-Garten LI-ION POWER 37 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van WOLF-Garten LI-ION POWER 37 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Pools, Turks, Deens, Zweeds, Noors, Fins als bijlage per email.

De handleiding is 2,64 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info