738223
41
Verklein
Vergroot
Pagina terug
1/116
Pagina verder
41
a) Voltage measuring “V~ and V
Before measuring voltages, always make sure that the measuring instrument is not set to
a measuring range for current.
Proceed as follows to measure AC voltages (V~):
Turn the digital multimeter on and select the measuring range “V ~”
with the rotary switch (5). “AC” is displayed in the LC display (4).
Auto-mode is selected by default. In auto-mode the digital multimeter
determines the voltage measuring range automatically. To switch
off auto-mode and select the measuring range manually, press the
SELECT button (1) once. The “Auto” symbol disappears from the LC
display (4).
Press the SELECT button (1) repeatedly to choose the measuring
range. The decimal point of the display shifts position between the
digits indicating the currently set measuring range and the units mV or
V are shown respectively. Choose the appropriate measuring range for
your measuring task. Observe that the maximum input values (also see
chapter 14. Technical Data) must not be exceeded during measuring.
To re-engage the auto-mode, press and hold the SELECT button (1)
for about 2 seconds. The “Auto” symbol appears on the LC display (4).
The auto-mode is activated.
Insert the red measuring lead into the V socket (8) and the black
measuring lead into the COM socket (9).
Now connect the two measuring prods to the object to be measured
(socket, relay, switch etc.) in parallel.
The red measuring tip indicates the positive pole, the black measuring
tip the negative pole.
The reading is indicated on the LC -display. The unit of the present
measurement is shown in V or mV. Readings are true mean square
values.
Press the HOLD button (12) in order to lock the measured value if
needed. The hold symbol appears in the LC-display (4). Press the
HOLD button (12) in order to release the locked value. The hold symbol
disappears from the LC-display (4).
After measuring, remove the measuring leads from the measuring object and turn the digital multimeter off. Turn
the rotary switch to the position “OFF”.
Before measuring voltages, always make sure that the measuring instrument is not set to a
measuring range for current.
41

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Voltcraft VC185 TRMS bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Voltcraft VC185 TRMS in de taal/talen: Nederlands, Duits, Engels, Frans als bijlage per email.

De handleiding is 10,88 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info