622294
4
Verklein
Vergroot
Pagina terug
1/55
Pagina verder
DVM68
25.02.2011
4
3. Safety Instructions
Read this manual thoroughly. Familiarise yourself with the functions of the device
before actually using it.
Only use the device for its intended purpose. Using
the device in an unauthorized
way will void the warranty. Damage caused by disregard of certain guidelines in this
manual is not covered by the warranty and the dealer will not accept responsibility
for any ensuing defects or problems.
Follow the instr
uctions below to guarantee a safe use of the meter and all its
functionalities.
During use of the meter, respect all directives concerning protection against
electroshocks and misuse. Never exceed the indicated limits.
WARNING: To avoid electrical shock always
disconnect the test leads prior to
opening the housing.
Remark: refer to the warning on the back of the meter
WARNING: To prevent fire, use exact fuses.
Remark: refer to the warning on the back of the meter
Keep the device away from children and unauthorised users.
Protect this device from shocks and abuse. Avoid brute force when operating.
Avoid cold, heat and large temperature fluctuations. When the unit is moved from a
cold to a warm location, leave it
switched off until it has reached room temperature.
This to avoid condensation and measuring errors.
This is an installation category CAT III 600V / CAT II 1000V measuring
instrument. Never
use this equipment in a higher category than indicated. Refer t
§4 Overvoltage /installation category.
Pollution degree 2-
device. For indoor use only. Keep this device away from rain,
moisture, splashing and dripping liquids. Not for industrial use.
Pollution degree.
Before each use, make sure the test probes are in good condition.
fingers behind the protective edges of the test probes while measuring!
touch free terminals when the meter is connected to a circuit.
Make sure the meter is in t
he appropriate measuring range before connecting it to a
test circuit.
Risk of electric shock during operation.
Be very careful when measuring live
circuits.
Use extreme caution when measuring voltages higher than 60Vdc or 30Vac
rms.
Do not measure circuits that may contain voltages > 1000V
Do not measure current in circuits with voltages > 250V
Do not conduct resistance, diode-
or continuity measurements on live circuits.
When measuring currents above 5
A, max. 15s continuous measurement
a 10 minutes break between 2 measurements.
When carrying out measurements on a TV set or switching power circuits, always be
aware that high amplitude voltage pulses at the test points might damage the
meter.
Do not replace internal parts
yourself. Replace damaged or lost accessories by
identical ones with the same specifications. Order spare accessories e.g. test probes
at your dealer.
Rev. 01
©Velleman nv
Read this manual thoroughly. Familiarise yourself with the functions of the device
the device in an unauthorized
way will void the warranty. Damage caused by disregard of certain guidelines in this
manual is not covered by the warranty and the dealer will not accept responsibility
uctions below to guarantee a safe use of the meter and all its
During use of the meter, respect all directives concerning protection against
disconnect the test leads prior to
Protect this device from shocks and abuse. Avoid brute force when operating.
Avoid cold, heat and large temperature fluctuations. When the unit is moved from a
switched off until it has reached room temperature.
This is an installation category CAT III 600V / CAT II 1000V measuring
use this equipment in a higher category than indicated. Refer t
o
device. For indoor use only. Keep this device away from rain,
moisture, splashing and dripping liquids. Not for industrial use.
Refer to §5
Before each use, make sure the test probes are in good condition.
Always place your
fingers behind the protective edges of the test probes while measuring!
Never
touch free terminals when the meter is connected to a circuit.
he appropriate measuring range before connecting it to a
Be very careful when measuring live
Use extreme caution when measuring voltages higher than 60Vdc or 30Vac
or continuity measurements on live circuits.
A, max. 15s continuous measurement
followed by
When carrying out measurements on a TV set or switching power circuits, always be
aware that high amplitude voltage pulses at the test points might damage the
yourself. Replace damaged or lost accessories by
identical ones with the same specifications. Order spare accessories e.g. test probes
4

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Velleman DVM68 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Velleman DVM68 in de taal/talen: Nederlands, Duits, Engels, Frans, Spaans als bijlage per email.

De handleiding is 0,9 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info