Technical Specifications
Frequency 1881.792 - 1897.344 MHz
No. of channels 5
LCD 35 (x) x 21.2 (y) mm B&W LCD
Power supply Use only adaptor listed below:
Baby unit:
RuiJing - RJ-AS060450B001
VTPL - VT04EUK06045
Input: 100- 240VAC 50/60Hz 150mA
Output: 6VDC 450mA
Parent unit:
RuiJing - RJ-AS060450B001
VTPL - VT04EUK06045
Input: 100- 240VAC 50/60Hz 150mA
Output: 6VDC 450mA
For pluggable equipment, the socket-outlet (power
adaptor) shall be installed near the equipment and
shall be easily accessible.
Use only battery listed below:
Battery Information:
Parent unit:
CORUN - Ni-MH AAA400*2
GPI - VTRHC043C041
2.4V, 400mAH, NiMH, AAA size
Nightlight
When this feature is turned on, the nightlight on the baby unit gives a
soft glow for comfort and allows easy location in the dark.
When nightlight is turned on, displays on the parent unit screen.
On the parent unit:
Press when the parent unit is not in use.
Press or to choose NIGHTLIGHT, then press select.
If the current nightlight setting is OFF, the screen displays ON? If
the current nightlight setting is ON, the screen displays OFF?.
Press to confirm your selection. The screen displays
SAVED and you hear a confirmation tone.
On the parent unit or baby unit:
Press for the first time, the baby unit nightlight turns on and
lullaby starts to play all lullabies.
Press for the second time, the baby unit nightlight turns off
and lullaby remains on.
Press for the third time, the baby unit nightlight turns on again
and lullaby goes off.
Press for the fourth time, the baby unit nightlight turns off
again and lullaby remains off.
Vibration alert
You can turn on the vibration alert so that the parent unit vibrates
when the baby unit detects sounds which light up four sound level
indicators on the parent unit.
When the vibration alert of the parent unit is turned on, displays.
The vibration alert is preset to OFF.
Press when the parent unit is not in use.
Press or to choose VIBE ALERT, then press select.
If the current vibration alert setting is OFF, the screen displays
ON? If the current vibration alert setting is ON, the screen
displays OFF?.
Press to confirm your selection. The screen displays
SAVED and you hear a confirmation tone.
1.
2.
3.
4.
•
•
•
•
1.
2.
3.
4.
NOTES:
Each time you set the vibration alert to ON, the parent unit vibrates briefly
after you press select.
The vibration alert setting on each parent unit is independent.
Talk to the baby unit
You can broadcast messages from a parent unit to the baby unit.
Press and hold talk on the side of the parent unit. The screen
displays TALK when the voice connection to the baby unit is
made. Speak towards the mic on the parent unit. Your voice is
broadcast to the baby unit.
NOTE:
If the speaker volume of the parent unit is set to VOLUME OFF, it will be
reset to the default VOLUME 3 when you press and hold TALK.
Monitor the temperature
Your baby unit measures the surrounding temperature. If the
detected temperature falls beyond a desired temperature range, the
parent unit screen will display LOW TEMP or HI TEMP.
You can change the settings for the temperature format and range,
as well as turn the temperature alert on or off by the following steps.
Temperature format
You can choose to display the temperature in Celcius (oC) or
Fahrenheit (oF).
Press when the parent unit is not in use.
Press or to choose TEMPERATURE, then press .
Press or to choose FORMAT, then press .
Press or to choose CELSIUS? or FAHRENHEIT?, then
press to save.
•
•
•
•
1.
2.
3.
4.
Minimum temperature
Press when the parent unit is not in use.
Press or to choose TEMPERATURE, then press .
Press again to choose MINIMUM.
Press or to choose the desired minimum temperature
(11-20oC), then press to save.
Maximum temperature
Press when the parent unit is not in use.
Press or to choose TEMPERATURE, then press .
Press or to choose MAXIMUM, then press .
Press or to choose the desired maximum temperature
(21-30oC), then press to save.
Temperature alert
Press when the parent unit is not in use.
Press or to choose TEMPERATURE, then press .
Press or to choose ALERT ON/OFF, then press .
If the current temperature alert setting is OFF, the screen
displays ON? If the current temperature alert setting is ON, the
screen displays OFF?.
Press to confirm your selection. The screen displays
SAVED. You will hear a confirmation tone.
1.
2.
3.
4.
1.
2.
3.
4.
1.
2.
3.
4.
5.
ECO range
You can change the setting of the ECO range. The shorter the ECO
range, the lower the radiation emitted, so the operating range will be
reduced.
To change the ECO range:
Press when the parent unit is not in use.
Press or to choose ECO range, then press .
Press or to choose FULL RANGE, HALF RANGE, ONE
ROOM, and DESK.
Press to confirm your selection. The screen displays
SAVED. You will hear a confirmation tone.
Extended ECO
You can turn on the extended ECO mode so that the radiation
emitted will be lowered to the minimum, so the operating range will
be reduced to the minimum.
To turn on the Extended ECO mode:
Press when the parent unit is not in use.
Presss or to choose Extended ECO, then press .
If the current extended ECO setting is OFF, the screen displays
ON? If the current extended ECO setting isextended ECO setting is setting is ON, the screen
displays OFF?.
Press to confirm turning on the Extended ECO. The screen
displays SAVED. You will hear a confirmation tone.
Reset
You can restore all the adjustable settings back to their original
factory settings.
To reset the baby monitor:
Press when the parent unit is not in use.
Press or to choose RESET, then press .
The screen displays CONFIRM? Press to confirm. The
screen displays SAVED. You will hear a confirmation tone.
1.
2.
3.
4.
1.
2.
3.
4.
1.
2.
3.
Before use
You should test the baby monitor before initial use, and at regular
intervals thereafter. Place the parent unit and the baby unit in the
same room to test the product.
Test your audio monitor
Speak towards the microphone of the baby unit. You will hear
the sound at the parent unit, and see the visual sound indicators
light up.
Positioning the baby monitor
NOTE:
Keep the baby unit out of reach of the baby. Never place or mount the baby
unit inside the baby’s cot or playpen.
Place the baby unit at least 1 metre / 3 feet away from your baby.
•
•
1.
Using your baby monitor
Power on or off the baby unit
Press and hold power on to turn the baby unit on. The power
on lights up.
Press and hold power on again to power off the baby unit.
Power on or off the parent unit
Press and hold to power the parent unit on. The screen
turns on.
Press and hold again to power off the parent unit. The
screen turns off.
NOTE:
The parent unit powers on automatically once it is connected to
AC power or the battery is installed. The baby unit also powers on
automatically once connected to AC power.
Adjust the speaker volume for baby unit
Press or on the baby unit at any time.
Adjust the speaker volume for parent unit
You can adjust the speaker volume from VOLUME 1 to VOLUME
5, or turn it off. The speaker volume is preset to VOLUME 3.
Press / or / when the parent unit is not in use.
When the speaker volume is set to off, the screen displays .
NOTE:
To enter the sensitivity menu of the parent unit, the baby unit must be
turned on.
•
•
•
•
•
•
•
•
Language
You can select the language to be used in all screen displays.
Press when the parent unit is not in use.
The display shows LANGUAGE. Press .
Press volume + or volume - to choose the desired language for
screen display.
Press to confirm your selection. The screen displays
SAVED and you hear a confirmation tone.
NOTE:
The language setting on each parent unit is independent.
Sound alert
Sound alert feature works only when the parent unit is in mute.
If you turn on the sound alert, the parent unit beeps when the baby
unit detects sounds which light up four sound level indicators on the
parent unit.
When the sound alert of the parent unit is turned on, displays. The
sound alert is preset to OFF.
Press when the parent unit is not in use.
Press or to choose SOUND ALERT, then press .
If the current sound alert setting is OFF, the screen displays
ON? If the current sound alert setting is ON, the screen displays
OFF?.
Press to confirm your selection. The screen displays
SAVED and you hear a confirmation tone.
NOTE:
The sound alert setting on each parent unit is independent.
1.
2.
3.
4.
•
1.
2.
3.
4.
•
