98458
13
Verklein
Vergroot
Pagina terug
1/18
Pagina verder
16
4. Turn the volume knob either to the left or
right to set the MINUTES.
5. Press the DISP button to store the current
setting.
The time has been set now.
RADIO OPERATION
1. Press the button to switch the set on.
If the set is not in RADIO mode:
2. Press the SEL MENU knob to select RADIO.
Select a waveband
Your radio is designed for reception of the FM
and AM wavebands.
z FM 1
z FM 2
z FM 3
z AM 1
z AM 2
Press the BAND/ID3 button to select the desired
radio band.
Select a station
Seek tuning
Press button (frequency down) or (fre-
quency up) to seek for a station. The tuner will
scan down or up to the next strong station.
Manual Tuning
Long press either one of the buttons or
to select manual tuning.
Press button (frequency down) or (fre-
quency up) until the desired radio station is se-
lected. If there is no further action for 10 sec.,
the radio will switch back to auto tuning mode.
Auto Store
Long press the SCH/ A /PS button, the radio will
search for the six strongest stations and store
them automatically under the preset memory
buttons 1 through 6.
Scan (Remote Control only)
This function allows you to scan the stations or
the presets of the current band.
Short Press the SCAN button and the radio will
start scanning.
When it receives a radio signal, the screen will
flash 10 times and show the reception frequency.
The radio will continue scanning using this pat-
tern.
When the desired station is reached, press the
SCAN button again to stop scanning.
Preset Scan
Short Press the SCH/ A /PS button, the radio
pauses for 5 sec. at each preset station. When
the desired station is reached, press the button
again to select this station.
Displaying time or frequency
Note: The set must be in radio mode.
1. Press the DISP button to toggle between the
actual time and the frequency of the section
selected.
FM Stereo Operation (Remote
Control only)
If the stereo signal becomes to weak (bad recep-
tion of the radio station):
1. Press the ST/LOC button on the remote
control until MONO appears in the display of
the radio.
2. Press this button again and STEREO ap-
pears in the radio display.
Memorising Radio Stations
1. Press the Band Button to select the desired
band, FM1, FM2, FM3, AM1 or AM2.
2. Tune in the desired radio station.
3. Long press any of the 6 Preset buttons to
store the radio station. The number will be
displayed next to the radio frequency. For
each band you can store up to six radio
stations.
RADIO DATA SYSTEM (RDS)
This feature is only available with the FM band!
Many FM stations broadcast RDS information.
All RDS related features e.g. TA, NEWS etc...
will be deactivated when option ‘RDS’ is set to
‘OFF’.
This set uses the RDS information to offer you
many advantages including:
Display of Station Name (PS)
The radio displays the name of the station in-
stead of its frequency.
Automatic frequency (AF)
The set remains tuned to the current station by
continually searching for the best possible alter-
native frequency for reception.
Note: The AF function is preset. You can switch
off AF if not required. Press the AF/REG button
and select OFF.
13

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw VDO Dayton CD1107 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van VDO Dayton CD1107 in de taal/talen: Engels als bijlage per email.

De handleiding is 3,44 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van VDO Dayton CD1107

VDO Dayton CD1107 Gebruiksaanwijzing - Nederlands - 19 pagina's

VDO Dayton CD1107 Gebruiksaanwijzing - Deutsch - 19 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info