652329
12
Verklein
Vergroot
Pagina terug
1/32
Pagina verder
12
8
1
2
1
2
1
6
16
2
0
20
1
8
18
2
2
22
2
6
2
6
1
4
14
1
2
1
3
2
A
A
B
B
C
C
C
C
C
C
C
C
C
B
A
C
B
A
2.5.6 - SHUNT PUMP
The ELLPREX boilers must always operate
in forced circulation hot water systems and
with a minimum return temperature of 55 °C..
So, it is suggestable to adopt a shunt pump,
having also an anti-condensation purpose,
installed between the flow and return
connections, upstream an eventual 3 or 4 way
mixing valve.
This pump will be sized according to the
following formula:
Q = P x 22
where Q = Water flow rate in liter/h
P = Boiler nominal output in kW
and the manometric head 1-2 m w.c.
2.6 - FURNACE DOOR:
ADJUSTMENT,
OPENING & CLOSING
2.6.1 - BOILERS “ELL 170 - ELL 630”
For all these models the hinging and the fixing
of the door are made according the schema
of fig. 14.
In these cases the door is mounted with 4
hinges of the same type: the two ones on the
L.H. side, with the shaft A inserted, are nor-
mally used as rotating hinges (from Right to
Left), whilst the two ones on the R.H. side
are used as door support; the door is then
blocked with four screws.
Exactly the contrary will happen when the
door is hinged on the R.H. side and the door
needs to be opened from Left to Right.
To get the reversion of the opening it is
sufficient to move the shafts A on the opposite
side.
On the door of these models of boiler the
following adjustments are possible:
A) Adjustment in vertical way: it is possible
only by introducing some washers of
convenient thickness under the hinge on
which the door rotates.
fig. 14
B) Adjustment in transversal way: it is
possible by unscrewing and side moving
the hinges fixed to the front tube plate.
C) Adjustment in axial way: it is possible
by screwing more or less the fixing
screws.
2.6.2 - BOILERS “ELL 760 - ELL 970”
For all these models the hinging and the fixing
of the door are made according the schema
of fig. 15.
In these cases the two hinges on the L.H.
side are normally used as rotating hinges
(from Right to Left), whilst the two ones on
the R.H. side are used as closing hinges.
Exactly the contrary will happen when the
door is hinged on the R.H. side and the door
needs to be opened from Left to Right.
To get the reversion of the opening it is
sufficient to move the rear couternuts onto
the opposite side.
On the door of these models of boiler the
following adjustments are possible:
A) Adjustment in vertical way: it is possible
by acting on the nut of the upper shaft of
the rotating hinge.
B) Adjustment in transversal way: it is
possible by unscrewing and side moving
the hinges fixed to the front tube plate.
C)Adjustment in axial way: it is possible by
screwing more or less the fixing screws.
fig. 15
90 °C; under this aspect it it suggested to
consider 100 °C.
The expansion pipe connects the C.H. system
to the expansion vessel.
This pipe which starts from the connecting
point T3 (see table DIMENSIONS), must have
NO gate valve on it.
12

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Unical Ellprex bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Unical Ellprex in de taal/talen: Engels als bijlage per email.

De handleiding is 0,75 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info