756407
9
Verklein
Vergroot
Pagina terug
1/12
Pagina verder
EN 9
pyrometer TP10
5. Press the Mode button(3) to return to the measurement
value display.
Info
The device memorizes the selected setting when
switching off.
Switching the laser pointer on or off
Ex works the laser pointer is switched off.
Info
Please observe that with a switched-on laser the laser
pointer will go on as soon as you press the
Measurement button(7) or activate continuous
measurement.
Warning of laser radiation
Class 2 laser radiation.
Lasers of class 2 only radiate in the visible range and
during continuous wave operation (lasting beam) no
more than 1 milliwatt (mW) of output will be emitted.
Looking directly into the laser beam for a longer period
of time (more than 0.25seconds) can cause damage to
the retina.
Avoid looking directly into the laser beam. Never look
into the laser beam using optical aides. Do not
suppress the winking reflex when looking into the laser
beam unintentionally. Never point the laser beam at
people or animals.
1. Repeatedly press the Mode button(3) until the Lit Laser
menu is displayed.
2. Press the F3button(2).
ðThe Laser indication(13) appears on the display.
ðThe laser pointer is active and will switch on when
starting with the next measurement.
3. Press the F3 button(2) again.
ðThe Laser indication(13) disappears.
ðThe laser pointer is switched off.
Info
The device memorizes the selected setting when
switching off.
Setting the alarm
The device is equipped with an alarm function for which an
upper and a lower alarm threshold can be specified. When
exceeding or falling below these values, an acoustic signal will
be emitted. Additionally, the display lights up in one of the
following colours:
Display colour Meaning
Flashes red Surface temperature exceeds
activated upper threshold. The
display flashes red and a
constant alarm tone is emitted.
Also works when the display
illumination is deactivated.
Flashes blue Surface temperature below
activated lower threshold. The
display flashes blue and a
constant alarm tone is emitted.
Also works when the display
illumination is deactivated.
Continuously illuminated in
green
Surface temperature is in
normal range. The display will
only be illuminated in green if
the display illumination is
activated.
Setting the lower alarm threshold:
1. Repeatedly press the Mode button(3) until the Hi Set Lo
menu is displayed:
2. Press the F3 button(2) to set the lower alarm threshold.
ðThe On menu will be displayed.
ðThe current value for the lower alarm threshold appears
on the display.
3. Press the F2 button(5) to enable (On) or disable (Off) the
lower alarm threshold.
ðWith enabled lower alarm threshold the indication
Lo(17) will be displayed.
4. Either press F3 or F1 to set the value.
ðFor larger temperature changes hold onto these buttons,
as needed.
5. Press the Mode button(3) to return to the measurement
value display.
ðThe setting for the lower alarm threshold is saved.
Setting the upper alarm threshold:
1. Repeatedly press the Mode button(3) until the Hi Set Lo
menu is displayed.
2. Press the F1 button(4) to set the upper alarm threshold.
ðThe On menu will be displayed.
ðThe current value for the upper alarm threshold appears
on the display.
9

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Trotec TP10 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Trotec TP10 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,74 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Trotec TP10

Trotec TP10 Gebruiksaanwijzing - Nederlands - 13 pagina's

Trotec TP10 Gebruiksaanwijzing - Deutsch - 13 pagina's

Trotec TP10 Gebruiksaanwijzing - Français - 13 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info