11
RQT5941
Before use
Connector
Approx. 6 mm
Appliance inlet
4 AM loop antenna.
To prepare antenna, twist the vinyl tip and pull off (a).
Keep loose antenna cord away from other wires and cords.
5 FM antenna.
Fix the other end of the antenna where reception is best.
6 Surround cable.
(United Kingdom only)
BE SURE TO READ THE CAUTION FOR THE AC
MAINS LEAD ON PAGE 4 BEFORE PROCEEDING TO
STEP 7.
7 Connect the AC mains lead.
Insertion of connector
Even when the connector is perfectly inserted, depending on
the type of inlet used, the front part of the connector may jut
out as shown in the drawing.
However there is no problem using the unit.
For your reference
Information you enter into the unit’s memory, except for time,
remains intact for up to two weeks after the mains lead is
disconnected.
The included AC mains lead is for use with this unit only. Do not use
it with other equipment.
Note
Television (not included) connection
A
Connect to a television that has a video-input terminal.
S-VIDEO OUT terminal
If your television has an S-video input terminal, use an S-video
cable (not included) to connect to this unit. You can achieve better
quality video with this connection. Connecting the included video
cord is not necessary if you do so.
Connect your DVD player directly to your TV set
(b).
If the DVD player is connected to the TV through a video
cassette recorder, the picture may not be played back normally
with some DVDs. So we strongly recommend you not to connect
the DVD player to your video cassette recorder when setting up
your home entertainment system.
Use the RCAJ adaptor (included) if your TV has 21-pin SCART
terminal (c).
You do not have to connect anything to the AUDIO terminals.
