612810
4
Verklein
Vergroot
Pagina terug
1/8
Pagina verder
4
SLEEP
CLOCK/
TIMER ADJ
DISPLAY
TIMER
SET/CHECK
PGM/CLEAR
-
AUTO PRESET
OPEN/
CLOSE
123
4
5
6
7
8
0
9
>
=
10
MUSIC PORT
TUNER/
BAND
CD
SOUND
EQ
LIVE
VIRTUALIZER
PLAY
MODE
ALBUM
VOL
VOL
TUNER/
BAND
ui
3
4
TUNER/
BAND
ui
3
4
TUNER/
BAND
123
4
5
6
7
8
0
9
>
=
10
Within 10 seconds
PGM
PGM
MONO
MONO
Radio operations
Radio stations can be tuned manually by selecting the station’s frequency or they can be preset into channels to make it easy to tune.
You can preset up to 20 FM channels and up to 12 AM channels.
To adjust the volume
0
(Minimum)
50
(Maximum)
Input using the numbered
buttons
To select a 2-digit number
e.g. 11: [ 10] [1] [1]
To adjust the volume
Allocation settings
Each country allocates broadcast bands according to their particular
system. You can change the AM step. The step is factory-set to 9 kHz, but
you can change it to receive broadcasts allocated 10-kHz steps. Any AM
frequencies preset in channels will be changed by this procedure. Preset
them again.
1. Select the FM band with [TUNER/BAND].
2. Press and hold [TUNER/BAND] on the unit.
After a few seconds the display changes to show the current minimum
frequency. Continue to hold the button down. The minimum frequency
changes and the step is changed.
To return to the original step, repeat the above steps.
Note
The preset memory will be initialized when you change the frequency step.
To improve reception
FM AM
Receive the radio stations after
connecting the antenna. Then
attach the antenna code on the wall
or pillar in the good reception.
Change the direction and location
of the antenna.
If noise is excessive in FM
You can improve FM reception by switching reception to monaural.
Press to turn the MONO
mode ON/OFF
Manual
tuning
Main unit
Remote control
Select “FM” or “AM”
Select the frequency
Select “FM” or “AM”
Select the frequency
Automatic
presetting
The tuner
presets the
stations it can
receive into
channels in
ascending order.
Auto
tuning
Manual
presetting
Preset the
stations one at a
time.
Selecting
channels
Main unit
Remote control
Select “FM” or “AM”
Press and hold until the
frequency starts changing
rapidly
Select “FM” or “AM”
Press and hold until the
frequency starts changing
rapidly
Auto tuning stops when it nds a station.
• To cancel auto tuning press the same button again.
Auto tuning may not function when there is
excessive interference.
Note
Perform once for FM stations and once for AM stations.
Select “FM” or “AM”
Press and hold until
“AUTO” appears
During automatic presetting, the memory indicator
(
PGM
) ashes and the frequency scrolls. The memory
indicator and channel numbers are displayed for a
second when a station is preset.
The rst station to be preset is displayed when
presetting nishes.
Note
Tune to
the station
you want to
set as the
preset.
Enter preset mode
Select a channel
The station occupying a channel is erased if another
station is preset over that channel.
Note
Select “FM” or “AM” Select a channel
Select “FM” or “AM” Select a channel
4

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Technics SCEN27 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Technics SCEN27 in de taal/talen: Engels als bijlage per email.

De handleiding is 1,55 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Technics SCEN27

Technics SCEN27 Gebruiksaanwijzing - English - 8 pagina's

Technics SCEN27 Gebruiksaanwijzing - Français - 8 pagina's

Technics SCEN27 Gebruiksaanwijzing - Suomi - 9 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info