464685
8
Verklein
Vergroot
Pagina terug
1/12
Pagina verder
8
GB
Smart Learning (Fast Learning)
If you cannot find your URC a correct Device Code for your equipment
from the Online Database, you can copy your original A/V remote control
commands to your URC via Learning. Your URC allows you to capture up
to 360 additional remote control commands and all 8 device modes can
facilitate learning in a second. Please follow the below instruction to start:
(Do not forget to have your original A/V remote control ready for your
learning process)
1. Select a desired Device Mode (e.g. TV, if you want to set up your URC to
operate your TV).
2. Press and Hold the Device Mode key (e.g. ) for 3 seconds, the LED
indicator will light up.
3. Release the Device Mode key (e.g. ).
4. Press and Release a desired key on the URC you want to hold the
command, the LED will flash slowly.
(Now aim your A/V remote control to the
URC Infra red Lens on a flat surface with
1–3 cm apart. Make sure your A/V remote
control is loaded with fresh batteries).
5. Press and Hold the corresponding key on
your original A/V remote control to transfer
the command. The LED indicator of the
URC will flash. When the command has
been learnt successfully, the LED indicator
will stay on. You can release the key on the A/V remote control. If the LED
indicator keeps flashing quickly, it shows error in learning process. Adjust
the position of both remote controls and repeat steps 4 & 5 again.
6. Repeat steps 4 & 5 to transfer other commands into the rest of the
function keys.
7. When you finished the whole device mode, Press and Hold the
corresponding Device Mode key (e.g. ) for 3 seconds to save all
the learnt command and exit the learning mode.
Remarks:
Your URC will quit the learning mode automatically after 30 seconds
of idle period.
If you want to quit the learning mode at any time, simply Press and
Hold the corresponding Device Mode key for 3 seconds.
Downloading a new Device Code from the Online Setup will
automatically erase and replace all learned commands in the chosen
device mode.
When you finished learning the original remote to your URC, you can
upload your URC to our ONLINE DATABASE for future retrieval, simply
connecting your URC with your PC, the system will prompt for your
action automatically.
– Master Reset of URC will erase your learned commands.
TV
TV
TV
1–3 cm
8

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Sunwave SR1200 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Sunwave SR1200 in de taal/talen: Engels als bijlage per email.

De handleiding is 1 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info