720574
12
Verklein
Vergroot
Pagina terug
1/93
Pagina verder
12
overloaded.
• Run the equipment at walking speed in lines that are
as straight as possible.
For uninterrupted mowing, the lines should always
overlap by a few centimetres.
• Do not move backwards.
• On slopes, always work across the slope.
• If the blade comes into contact with a foreign body,
switch off the engine immediately. Wait until the blade
is stationary and check the equipment for damage.
Restart work only if the equipment is undamaged.
• Switch off the equipment during longer breaks and for
transportation and wait until the blade is stationary.
Starting and Stopping the Engine
- Check the petrol and oil levels regularly and refill in
time.
- Start the equipment on a sturdy, level base, if possible
not in long grass. Ensure that the cutting tool is touching
neither objects nor the ground.
Start the Engine:
1. Pull the safety catch (3) towards the handle bar and
hold it.
2. Pull the starter cord (23) and the engine starts.
Stopping the Engine:
3. Release the safety catch (3), the engine stops and the
blade is slowed.
Mowing
1. Start the engine (see above).
2. Wheel drive on: pull the drive catch (1) towards the
handle bar. The mower moves forwards.
3. Wheel drive off: release the drive catch (1). The
equipment stops.
Setting the Cutting Height
The equipment has 8 positions for setting the cutting
height.
1. Pull the lever (18) outwards and push it to the desired
position 1-8 (Fig.11).
2. Push the lever (18) back in.
Emptying the Grass Collection Box
Through the observation window fitted in the rear impact
protection ( 7), you will see when the grass collection
box is full.
1. Stop the engine and wait until the blade is stationary.
2. Lift the rear impact protection (7) and remove the
grass collection box (20).
3. Empty (see “disposal / environmental protection“
chapter) and reassemble the grass collection box (20).
Mowing with the Mulch Kit
When mulch mowing, the grass is cut, chaffed and
spread on the lawn all in one go. The cut grass serves as
a natural fertiliser.
Tips for Mulch Mowing:
• Cut the grass back by 2 cm from a grass height of 4-6
cm.
• Use sharp cutting blades.
• Do not mow wet grass.
7. Cleaning and Maintenance
Have any repair and maintenance work not
described in these instructions carried out by a
specialist workshop. Use only original replacement
parts. Risk of accidents! Carry out maintenance
and cleaning work strictly with the engine switched
off and spark plug connectors removed. Risk of
injury! Allow the equipment to cool before any
maintenance and cleaning work. Elements of the
engine are hot. Risk of burning!
Cleaning and General Maintenance Work
Tip the Equipment:
To clean the underside of the equipment, tip the
equipment backwards on the upper handle bar (2).
To prevent the equipment from tipping back,
G
B
12

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Stanley SLM-196-510-SP bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Stanley SLM-196-510-SP in de taal/talen: Duits, Engels, Italiaans, Portugees, Deens, Zweeds, Noors, Fins als bijlage per email.

De handleiding is 4,31 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info