619691
20
Verklein
Vergroot
Pagina terug
1/20
Pagina verder
18
GATSO
300M
SPECS
START
ALL MODE
In ALL mode the device will detect all alerts generated through GPS that
are within the selected range of the device. If you were travelling on a
Motorway for instance it would mean that the unit could detect locations
situated on an ’A’ road that is near to the Motorway. As it is not on the road
you are travelling however it is not a threat and you might prefer to select
the Motorway setting so that the unit would ignore unwanted signals
located by GPS. Important: laser and radar alerts remain unaffected.
4. Cancel Button
If during an alert you decide that you would like to cancel it simply press
the ’Cancel’ button. The display will automatically return to the Standby
screen and the device will be ready to alert you the next time you
encounter a stored co-ordinate or radar/laser source.
5. Mute Button
If during an alert you decide that you would like to mute the audible alert,
simply press the ’Mute’ button. The screen will continue to display a visual
alert but no sound will be heard. After you have travelled out of range of the
location the device will automatically reset so that the next time you encounter
a location you will receive both audible and visual alerts as normal.
6. Alert patterns
Gatso & Truvelo Safety Cameras
As you approach the Safety Camera the
unit will begin to emit your chosen audible
alert, either a Soft or Hard ’Beep’ at your
preset alert distance. As you get closer to
the camera the ’Beeping’ will quicken. At
the same time the display will indicate the
type of location you are approaching, your
current speed, the speed limit at the location, the road number and your
distance to the location. If you are approaching a radar based Gatso
Camera and have the S6-RLD attached an * will indicate whether the
camera is operational or not. This type of alert pattern is the same for
Truvelo Safety Cameras except that the display would indicate ’Truvelo’
not ’Gatso’ next to the signal strength distance meter.
If you would like to change the alert to a visual alert only press the ’Mute’
button to temporarily turn off the sound. If at any time you would like to
stop the alert, simply press ’Cancel’
SPECs Safety Camera Systems
Due to the fact that the SPECs camera
incorporates a series of cameras that
monitor you over a fixed distance, a
different alert pattern has been devised
to ensure that your concentration is
maintained throughout the danger zone.
If you are approaching the first camera in
SPEED
LIMIT
27MPH 30MPH
SPEED
LIMIT
48MPH 50MPH
CANCEL MUTE MENU
CANCEL MUTE MENU
19
the SPECs system your S6 will begin it’s alert at the preset alert distance
set by you with the display indicating ’SPECS START’. The unit would
then emit an audible alert every five seconds to remind you that you are
still within the SPECs system. If after 20 seconds you do not pass
another camera, for instance if you have turned off the motorway without
passing the last camera in the SPECs series, the alert will automatically
’Time out’ and the alert will finish.
Whilst travelling through a SPECs series however, your Snooper S6 will
provide both an audible and visual alert 250m before each camera as
well as indicating the number of each camera in the series i.e. SPECS 2,
SPECS 3 and so on, plus continuing to indicate every 5 seconds between
locations. When you reach the last camera in the sequence the display
will indicate ’SPECS END’
Please note that if you join a road in the middle of a SPECs system you
will automatically get a visual and audible alert, indicating the number of
that camera in the sequence, 250m before the first camera that you pass.
The display will indicate the number of that camera in the overall
sequence.
If you would like to change the alert to a visual alert only press the ’Mute’
button to temporarily turn off the sound. If at any time you would like to
stop the alert, simply press ’Cancel’.
Radar & Laser Alerts
If you have the S6-RLD connected to your S6 you will be able to receive
radar & laser alerts. The information provided is more basic than when
you receive an alert via GPS but still effective. When the device first
receives a radar alert the unit will begin to ’Beep’ slowly at first but
quicken, as you get closer to the source. At the same time the LCD
display will indicate what type of radar you are detecting, whilst a signal
strength meter in the form of a series of ’Blocks’ and a strength ’Level’
number will let you know whether you are getting closer to the source or
not.
If you receive a laser signal you will
get a very similar alert, however as
laser often requires instant action the
device simply gives you a full strength
audible alert whilst the display will
read ’Laser’. No signal strength will
be indicated.
As GPS is not used to locate radar
or laser only alerts it is impossible to
indicate the Speed Limit at these points or the road number.
If you would like to change the alert to a visual alert only press the ’Mute’
button to temporarily turn off the sound. If at any time you would like to
stop the alert, simply press ’Cancel’.
K-BAND
3
SPEED
27MPH
CITY CANCEL MUTE MENU
A6
A6
20

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Snooper S6-R Neo bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Snooper S6-R Neo in de taal/talen: Engels als bijlage per email.

De handleiding is 2,44 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info