619691
19
Verklein
Vergroot
Pagina terug
1/20
Pagina verder
17
3. City Mode Button
The CITY mode is operated through the CITY button available on the
Standby screen and has been designed to help reduce unwanted signals
generated by GPS. There are three possible modes to choose from,
’CITY’, ’MOTORWAY’ or ’ALL’. To change from ’CITY’ to ’MOTORWAY’
simply press the button below ’CITY’ on the display once. The icon will
change to ’MWAY’ to confirm your selection. To change from ’MWAY’ to
’ALL’ press the button again. The icon will change to ’ALL’ to confirm your
selection. To return to the ’CITY’ setting press the button once again. The
icon on the display will change to ’CITY’ to confirm your selection.
CITY MODE
In CITY mode the Snooper S6 will ignore any alert generated through
GPS that is actually located on a Motorway that is in range of your device
but not an immediate threat to you, as you are not actually travelling on
that section of road. Important: laser and radar alerts remain unaffected.
Please note that whilst in the CITY mode the device will not detect
any locations on Motorways or ’M’ roads so you need to remember
to switch to either the ’MWAY’ or ’ALL’ settings when driving on a
Motorway or ’M’ road.
MOTORWAY MODE
In MWAY mode the Snooper S6 will ignore any alert generated through
GPS that is actually located on a none Motorway road that is in range of
your device but not an immediate threat to you, as you are not actually
travelling on that section of road. If your speed drops below 20mph the
device will sound an audible alert and ’Switch Modes?’ will be shown on
the display to remind you that you may no longer be travelling on a
section of Motorway and may need to change the mode to ’CITY’ or ’ALL’.
Important: laser and radar alerts remain unaffected.
Please note that whilst in the MWAY mode the device will not detect
any locations on none Motorway roads so you need to remember to
switch to either the ’CITY’ or ’ALL’ settings when leaving an ’M’ type
road.
1
Satellite Counter — Shows how many satellites your unit can currently see.
2 City Button — Confirms CITY , MWAY or ALL (see below for details).
3 Cancel Button — Used to cancel an alert.
4 Mute Button — Used to cancel an audible alert (see page 18 for details).
5 Menu Button — Used to access Full Logic Menu and set features and
settings.
6 Indicates direction of travel.
7 RD icon confirms if your radar/laser detector is successfully connected.
(This will only appear during start-up if you have S6-RLD connected).
8 Atomic Clock.
9 Shows vehicle speed.
20
7. Saving new co-ordinates
If in the unlikely event that you pass the location
of a Safety Camera and your Snooper S6 does
not provide an alert, the S6 gives you the
opportunity to upload the co-ordinates of the
location manually. Simply park safely as close
as possible to the site and press the new
location button. An icon will appear on the
display to confirm that the location has been
saved successfully. Next time you perform a
download you will get the opportunity to upload
the new site for verification. If verified successfully the co-ordinates will
be added to our master database.
If during the period before you perform your next download, you pass the
site again your S6 will now alert you to the new location. As the device
does not know what type of system you are passing the display will
describe it simply as ’MEMO’ and the number of that co-ordinate in the
units memory.
Features & Settings
1.Alert Settings
The Alert Settings allows you to
adjust the distance that your S6 will
detect from when utilising GPS and
also allows you to set the type of
audible warning you hear as the
device alerts you to a location. To
enter ’ALERT SETTINGS’ from the
Standby screen press the button
below ’Menu’ (5) on the LCD display
and then using the buttons below the
Up (3) and Down (4) arrows on the LCD display, scroll until ’ALERT
SETTINGS’ is highlighted. Then simply press the button below ’Select’ (5)
on the display and again use the buttons below the arrows on the display
to highlight the setting, either ’AUDIBLE ALERT’ or ’SET PRE ALERT’
depending on what you would like to adjust. Once you have made your
choice press the ’Select’ button.
AUDIBLE ALERT - There are three
AUDIBLE ALERT settings to choose
from. Using the buttons below the
arrows on the display (3 & 4), choose
between HARD TONE, SOFT TONE
and OFF (no audible alert) and press
the ’Select’ button (5) to confirm your
selection. The display will read
’SETTING CONFIRMED’ and will
return to the Menu screen.
New Location
Button
MENU
CANCEL
SELECT
1. ALERT SETTING
2.
RADAR & LASER
3. AUTOMUTE
SOFT TONE
HARD TONE
OFF
3 4 5
2 3 4 5
SUB-MENU
EL
MUTE MENU
CANCEL
SELECT
CANCEL
SELECT
19

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Snooper S6-R Neo bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Snooper S6-R Neo in de taal/talen: Engels als bijlage per email.

De handleiding is 2,44 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info