125997
22
Verklein
Vergroot
Pagina terug
1/26
Pagina verder
User instructions
41
6. Troubleshooting
The electronic control system is able to find and signal a series of possible malfunctions of the
dihwasher by means of
PROGRAM PHASES INDICATOR LIGHTS (8)
, which illuminate following
well determined sequences, corresponding to different problems.
In the event of a fault or malfunction,
before calling the After-sales service centre
, we suggest
that you first consult the troubleshooting guide below.
If the problem persists even after implementing the recommended solutions, call the After-sales
service centre
after
having carried out the following:
making a note of the fault message (
E1
,
E2
,
);
unplug the power cord from the socket;
shut off the water supply tap.
TABLE OF FAULTS DETECTED BY THE SELF-DIAGNOSTICS SYSTEM
FAULT DESCRIPTION
E1
żżżƔ
The dishwasher’s AQUASTOP anti-flooding system has been activated (only for models equipped with
the device).
To reset the signal failure, you must switch off and restart the appliance. You must also call the AFTER-
SALES SERVICE to find out what caused the problem.
E2
ƔżżƔ
The system for limiting the water level in the dishwasher has been triggered.
It could be a temporary failure. Try opening and closing the dishwasher door and starting the appliance again.
If the problem persists, call the authorised technical service centre.
E3
żƔżƔ
The dishwasher fails to heat the water.
Try opening and closing the dishwasher door and starting the appliance again.
If the problem persists, call the authorised technical service centre.
E4
ƔƔƔż
The washing temperature sensor is disconnected.
Call the After-sales Service.
E5
ƔƔżƔ
The dishwasher fails to draw water.
Check that:
the water supply tap is open;
the filter in the water intake hose is not clogged;
the water intake hose is not kinked or bent.
Once you carried out these operations, switch the appliance off and start it again, press the ON/OFF button
again and the program will restart from the point at which it was interrupted.
If the problem persists, call the authorised technical service centre.
E6
ƔżƔƔ
The dishwasher fails to drain.
Check that:
the flexible drain hose is not kinked or obstructed;
the water drain pipe is not obstructed;
the dishwasher filter is not clogged.
Once you carried out these operations, switch the appliance off and start it again, press the ON/OFF button
again and the program will restart from the point at which it was interrupted.
If the problem persists, call the authorised technical service centre.
E9
żżżƔ
There is a malfunction in the water filling system.
Call the After-Sales Service to find out what caused the problem.
In the event of error codes not included in this table, call the Technical Service Centre.
22

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Smeg plb 964 b bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Smeg plb 964 b in de taal/talen: Engels als bijlage per email.

De handleiding is 1,34 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Smeg plb 964 b

Smeg plb 964 b Gebruiksaanwijzing - Nederlands - 26 pagina's

Smeg plb 964 b Gebruiksaanwijzing - Deutsch - 26 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info