758357
5
Verklein
Vergroot
Pagina terug
1/52
Pagina verder
5.
Specific Safety Rules for Scroll Saws
Always disconnect the power cord from the
power source before making any adjustments or
attaching any accessories. Always turn off saw
before disconnecting it to avoid accidental start-
ing when reconnecting to a power source. You
may unexpectedly cause the tool to start leading to
serious personal injury.
Never leave tool running unattended. Turn power
off. Don't leave tool until it comes to a complete stop.
Never leave the switches in "ON" position. Before
plugging the tool in, check that the switches are
"OFF". Accidental start-ups could cause injury.
Do not use tool if switch does not turn it on and
off. Have broken switches replaced by an authorized
service center.
Use only Skil scroll saw blades. Use the right blade
size, style and cutting speed for the material and the
type of cut. Sharp blades minimize stalling and kick-
backs. Blade teeth should point down toward the
table.
Avoid awkward operations and hand positions
and always make sure you have good balance. A
sudden slip could cause your hand to move into the
blade.
Firmly clamp or bolt your scroll saw station to a
stable, level workbench or table. The most com-
fortable table height is approximately waist height.
Never stand on tool. Serious injury could occur if
the tool is tipped or if the blade is unintentionally con-
tacted.
Before making a cut, be sure all adjustments are
secure. Loose table or guards could shift in use and
cause you to loose control of the workpiece.
Always adjust drop foot to just clear the work-
piece. Proper adjustment of the drop foot will help
protect your fingers and keep blade breakage to a
minimum.
Always support large workpieces while cutting to
minimize risk of blade pinching and kickback.
Heavy workpiece may cause the table to slip, walk or
slide while cutting.
Be sure the blade path is free of nails. Inspect for
and remove nails from lumber or workpiece before
cutting or sanding.
Keep hands away from cutting area. Do not hand
hold pieces so small that your fingers go under the
blade guard. Do not reach underneath work or in
blade cutting path with your hands and fingers for any
reason.
Never start the tool when the blade is in contact
with the workpiece. Allow the motor to come up
to full speed before starting a cut. Blade in contact
with the workpiece on start up will cause it to jump.
Observe and follow correct direction of feed and
do not feed the material too quickly. Hold the
work firmly against the table. Feed work into a
blade against the teeth of the blade. Feeding materi-
al too forcefully may cause blade to snap.
Use caution when cutting materials with an irreg-
ular cross-section or rounds like dowel rods. If
possible lay the material on its "flat" side when
cutting. For round stock use a "Vee" block to
support the material. Wavy material like molding
will tend to rock and may bind while cutting. Rounds
will tend to roll while being cut and the blade may
"bite" and grab it from your control.
Do not remove jammed cutoff pieces until blade
has stopped. Never touch blade or other moving
parts during use. Contacting the blade or other
moving mechanism may cause injury.
Wear eye protection and respiratory protection.
Know how to shut off tool in an emergency.
Do not expose to rain or use in damp locations.
Grounding required.
SM 2610957121 05-08 6/5/08 7:35 AM Page 5
5

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Skil 3335-01 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Skil 3335-01 in de taal/talen: Engels, Frans, Spaans als bijlage per email.

De handleiding is 3,82 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info